Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Oct 05, 2012 12:47 pm
I put a new bearing on the shaft that the belt pulley rides on. When I went to put on the oil seal, I noticed that it was 2 1/16ths larger there abouts than the pto shaft.The seal # is cr11223. Its 1 and 2/16ths dia while the shaft is 15/16ths dia.
I got on YT and someone said that I needed a bushing to go somewhere, but couldnt/didnt tell me the part# or exactly, to me, where it went. Can ya help me out??
Fri Oct 05, 2012 1:26 pm
I thought what was said there was fairly clear. Here is a picture. You need reference number 45 and either the pulley or number 46 to hold it in place.
Fri Oct 05, 2012 7:05 pm
You might want to view this thread - Belt Pulley Gear Box Rebuild
BTW, g'day to you.
Fri Oct 05, 2012 7:20 pm
This might help also
Fri Oct 05, 2012 8:05 pm
I called the IH dealer for Okla, or at least the Eastern 1/2 of it. Said those bushings had been deleated from stock decades ago. Anybody know where to find them?
Fri Oct 05, 2012 10:01 pm
You may want to try a local trades supply shop - bring in the old bushing and the dimensions needed. They may be able to provide the bushing that you need.
Sat Oct 06, 2012 7:01 am
Newer version, Tim.
Sat Oct 06, 2012 7:52 am
Will have better info after I start to put it back together, but as Jim says that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.
That bushing may be why my Mott mower gear box is leaking?? I will take that one apart after I finish mowing this weekend.
Sat Oct 06, 2012 8:28 pm
Buzzard Wing wrote:that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.
Well I just figured out what that weird part was on Granny's Belt Pulley Gear Box.
Sat Oct 06, 2012 9:34 pm
I dont have EITHER collars/bushings. If I did I would have taken them if bad to a machine shop and had them made. IF I could get specs I should be able to do that anyway.
Sat Oct 06, 2012 9:43 pm
Ok. We should know what all the dimensions are for the bushing while we are at Cecil's. There are a couple of Belt Pulley rebuilds slated. Of course Larry is in the midst of one now as well.
Sun Oct 07, 2012 8:33 pm
Well, Thanks guys for the offers of help.
Mon Oct 08, 2012 8:21 am
Up to my eyeballs at the moment, but may try to have a fellow Cub owner teach me a trick about 'sizing' the mystery center bearing.
I haven't taken the Mott mower's right angle pulley off yet (just mowed the fort with it yesterday) but I am thinking that bushing may be why it leaks (and lets water in).
Pictures are still in the camera....
Mon Oct 08, 2012 8:30 am
Maybe this will help clear things up.viewtopic.php?f=142&t=47666
Mon Oct 08, 2012 12:48 pm
I had forgotten Bill had done that article. Will print it out I think and take it with us.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.