Farmall Cub

I put a new bearing on the shaft that the belt pulley rides on. When I went to put on the oil seal, I noticed that it was 2 1/16ths larger there abouts than the pto shaft.The seal # is cr11223. Its 1 and 2/16ths dia while the shaft is 15/16ths dia.
I got on YT and someone said that I needed a bushing to go somewhere, but couldnt/didnt tell me the part# or exactly, to me, where it went. Can ya help me out??

I thought what was said there was fairly clear. Here is a picture. You need reference number 45 and either the pulley or number 46 to hold it in place.

You might want to view this thread - Belt Pulley Gear Box Rebuild.

BTW, g'day to you.

to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.

This might help also
Tim

I called the IH dealer for Okla, or at least the Eastern 1/2 of it. Said those bushings had been deleated from stock decades ago. Anybody know where to find them?

You may want to try a local trades supply shop - bring in the old bushing and the dimensions needed. They may be able to provide the bushing that you need.

Newer version, Tim.

Will have better info after I start to put it back together, but as Jim says that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.

That bushing may be why my Mott mower gear box is leaking?? I will take that one apart after I finish mowing this weekend.

Buzzard Wing wrote:that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.

Well I just figured out what that weird part was on Granny's Belt Pulley Gear Box.

I dont have EITHER collars/bushings. If I did I would have taken them if bad to a machine shop and had them made. IF I could get specs I should be able to do that anyway.

Ok. We should know what all the dimensions are for the bushing while we are at Cecil's. There are a couple of Belt Pulley rebuilds slated. Of course Larry is in the midst of one now as well.

Well, Thanks guys for the offers of help.

Up to my eyeballs at the moment, but may try to have a fellow Cub owner teach me a trick about 'sizing' the mystery center bearing.

I haven't taken the Mott mower's right angle pulley off yet (just mowed the fort with it yesterday) but I am thinking that bushing may be why it leaks (and lets water in).

Pictures are still in the camera....

Maybe this will help clear things up.

viewtopic.php?f=142&t=47666

Don:

I had forgotten Bill had done that article. Will print it out I think and take it with us.