Help identify implement parts please
Posted: Sat Oct 06, 2012 10:47 pm
Hey all,
I'm on a shed-cleaning kick, and have accumulated the following parts over the years. I'm not really sure what some of it is, and figured if I posted a few pictures...
I've done a bunch of looking at TM Tractor's site and have possibly identified a few things. Others are still a mystery. Ideally, I would like to know approximate values for these parts as well. Thanks in advance for any help you can provide!
These parts came off the same tractor. From TM's site, they appear to be for use with a Cub 189 Two Way Moldboard Plow. What would they be called? Would the lever also work with a 193 plow? I've also got the double chain hook for the rear rockshaft.
Top two - I have absolutely no idea
Third from top - fast hitch helper spring? Can this serve any purpose on a tractor without a fast hitch? That's how I obtained it.
Bottom two - Cub 22 mower stuff? The smaller one appears to be broken on the end, like it should have threads or a cotter pin hole.
This stuff all came from the same tractor, and I believe it is all cultivator related. Any idea of what it may be worth?
More cultivator parts... the spring-loaded ones have a left, right, and center. The other 3 appear to be all the same. I think they are for use with the following pic:
This stuff and the picture of the actual cultivator "diggers" all came with the same tractor. Is this just a generic toolbar, or is it part of an actual Cub implement? I have a few of the clamps shown, some are for use with round-shank cultivators and some for flat-shank (two of each shown here).
I have a local guy looking to buy cultivator stuff and have absolutely no idea what to ask. I know the front setup is missing some parts, but he has expressed interest even though I made it clear I don't have a complete setup.
Again, thanks for any help you can provide. If more pictures would be helpful, just let me know what you'd like to see.
John
I'm on a shed-cleaning kick, and have accumulated the following parts over the years. I'm not really sure what some of it is, and figured if I posted a few pictures...
I've done a bunch of looking at TM Tractor's site and have possibly identified a few things. Others are still a mystery. Ideally, I would like to know approximate values for these parts as well. Thanks in advance for any help you can provide!
These parts came off the same tractor. From TM's site, they appear to be for use with a Cub 189 Two Way Moldboard Plow. What would they be called? Would the lever also work with a 193 plow? I've also got the double chain hook for the rear rockshaft.
Top two - I have absolutely no idea
Third from top - fast hitch helper spring? Can this serve any purpose on a tractor without a fast hitch? That's how I obtained it.
Bottom two - Cub 22 mower stuff? The smaller one appears to be broken on the end, like it should have threads or a cotter pin hole.
This stuff all came from the same tractor, and I believe it is all cultivator related. Any idea of what it may be worth?
More cultivator parts... the spring-loaded ones have a left, right, and center. The other 3 appear to be all the same. I think they are for use with the following pic:
This stuff and the picture of the actual cultivator "diggers" all came with the same tractor. Is this just a generic toolbar, or is it part of an actual Cub implement? I have a few of the clamps shown, some are for use with round-shank cultivators and some for flat-shank (two of each shown here).
I have a local guy looking to buy cultivator stuff and have absolutely no idea what to ask. I know the front setup is missing some parts, but he has expressed interest even though I made it clear I don't have a complete setup.
Again, thanks for any help you can provide. If more pictures would be helpful, just let me know what you'd like to see.
John