Switch to full style
Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Re: Sickle Mower

Tue Oct 09, 2012 7:12 am

Jim Becker wrote:If you have a full pulley width of misalignment, the small stack of shims isn't going to be enough to fix it. Take close look at the Cub-22 pictures on the TM Tractor Parts web site to see where you may be off kilter. Here are direct links to 2 pages. By the way, the shims are on the mower flywheel shaft at each end, between the mounting brackets and the pulley or flywheel.
http://www.tm-tractor.com/gim/cub22_001.htm
http://www.tm-tractor.com/gim/22com_001.htm


Previous owners can do some wild things. PO of my sickle mower had a stack of several washers on that shaft. Perhaps not quite as thick as a pulley, but pretty close. Without pics, it's a shot in the dark on figuring out his problem. I agree that most likely something else is off kilter.

Re: Sickle Mower

Tue Oct 09, 2012 12:28 pm

Thanks Thomas. I wish I could post a few pictures. I think I have the wrong PTO pulley on the cub because it is flush with the end of the shaft. I have seen some pulleys that extend further because the portion that fits onto the splines extend further behind the pulley.

Re: Sickle Mower

Tue Oct 09, 2012 12:59 pm

There's the description we needed! :{_}: Yep you are right. Those pulleys can be kind of pricey.

Re: Sickle Mower

Tue Oct 09, 2012 1:01 pm

pat.ladner wrote: I wish I could post a few pictures. I think I have the wrong PTO pulley on the cub because it is flush with the end of the shaft.

Pat, can you email a pic of the pulley to me? I will post it for you. jeepguy1@cinci.rr.com.

Re: Sickle Mower

Tue Oct 09, 2012 3:37 pm

Pat sent me a pic of his pulley set up. It wasn't hard to see what the problem is. The pulley on the PTO is for a belly mower, not a sickle mower.

Image

The correct pulley should be a 4" or 4 1/2" pulley to operate correctly and at the right speed. Below is the correct configuration.

Image

Image

Re: Sickle Mower

Tue Oct 09, 2012 3:43 pm

Thanks Barnyard. I've been curious as heck about his setup! :lol:

Re: Sickle Mower

Tue Oct 09, 2012 4:26 pm

Thomas, I just saw that you are from Raymond MS. I'm from Pass Christian. I'll send you a PM. Let's talk. Maybe you can point me to someone near us who paints tractors. I want to get the cub painted.

Re: Sickle Mower

Tue Oct 09, 2012 4:40 pm

Well, I think that the problem has been identified. I talked to Mike at Columbia Tractor in N.Y. state and he is sending the correct pulley and the part that I need to keep the sickle blade from falling when putting it in the travel mode. He really knows his stuff. I hope this takes care of the problem so I can cut around my ponds.

Re: Sickle Mower

Tue Oct 09, 2012 5:13 pm

I'm still learning how to use everything this forum provides. I know there is a way to formally send a "Thank You" but since I haven't figured it out yet. So, I'd like to thank everyone who has helped me figure out these two problems. I guess if I had been really alert/smart, I would have seen the difference in my PTO pulley and the one in the picture in my manual. Oh Well. Again, Thanks to all of you and I'm sure this will not be the final thank you because there will always be more problems. This is a great forum.

Re: Sickle Mower

Tue Oct 09, 2012 6:01 pm

Pat:

There is a thanks button in the upper right hand corner of each post. Hit the Thanks button in the post you wish and it will automatically generate a PM and a Gratitudes to the member whose post you hit the Thanks button.

Re: Sickle Mower

Tue Oct 09, 2012 6:53 pm

Thanks for educating me. If I can just figure out how to get pictures of my cub on the forum, I would be very happy.

Re: Sickle Mower

Tue Oct 09, 2012 7:01 pm

Pat, click on "Photo Host" in the upper right menu bar and get an account. Then whatch these two videos.





You can also attach photos directly to a post but you can't manage your photos once you do that.

Re: Sickle Mower

Tue Oct 09, 2012 10:43 pm

Pat:

Along with what Bill posted there are these as well:

On The Forums

Re: Sickle Mower

Sat Oct 13, 2012 5:20 pm

Thanks Rudi, I too never knew about the Thanks button and all this other Good Stuff. Bill wlm cub

Re: Sickle Mower

Wed Oct 17, 2012 1:31 pm

Just a follow up to my sickle mower escapade. I cover a few updates and a question as follows:

1. I called Mike at Columbia Tractor and he was as good as was mentioned. I bought the correct pulley and the piece that keeps the blade from falling when put in the traveling position. The pulleys lined up correctly and everything was good until I tried cutting. The guard that protects the wooden drive shaft was pushed up and the flange at the end of the wooden shaft that attaches to the drive shaft hit it a couple of time before I could disengage the PTO. The flange broke. So, I order a new one.

2. I think the blades need replacing. Is is better to buy a new complete bar with the blades or to just replace the blades?

3. I really appreciate all of the help that all of you have provided. This is best forum of all the forums that I am a member.

4. Mays Thomas/Thomas Mays provided me with the name of a man near us that paints Cubs. So, after I get the sickle mower back in operation, I will probably get it painted.

5. One day soon, I will post a little history of my Dad's little cub tractor.

Thanks again,

Pat
Post a reply