Page 1 of 1
Parts identification
Posted: Sun Oct 21, 2012 6:25 pm
by Chris D
I got these 2 pieces in with some other stuff with my recent cub. I believe one to be the hold up to hook the chain for a sickle mower when not in use? As for the straight bar piece with the small pin on the side I don't have a clue. Thanks
Re: Parts identification
Posted: Sun Oct 21, 2012 6:51 pm
by Don McCombs
You are correct on the triangular piece. No clue on the other one.
Re: Parts identification
Posted: Sun Oct 21, 2012 7:03 pm
by Former Member
the first part is for the rockshaft on the right side (lift side) of the cub. I have never seen the part, but out of curiosity, I went out and looked at a rockshaft and there are 2 holes the size of that pin in the arm.
Will be interesting to find out what it was used to lift.
Re: Parts identification
Posted: Sun Oct 21, 2012 8:00 pm
by tst
I got a cub in with one of those bolted to the torque tube implement holes, no clue to its use?
Tim
Re: Parts identification
Posted: Sun Oct 21, 2012 9:03 pm
by Rudi
Post a pic Tim
Re: Parts identification
Posted: Sun Oct 21, 2012 10:23 pm
by t jackson
i know exactly what that 1st part is it attaches to the right side rockshaft for the 1st version, early , of the leveling and grading blade to hook the lifting rod to not many around i guess i win that part
Re: Parts identification
Posted: Sun Oct 21, 2012 10:41 pm
by John *.?-!.* cub owner
Re: Parts identification
Posted: Mon Oct 22, 2012 5:09 am
by Chris D
Very interesting. Thanks guys. As always on here people come thru with great knowledge!
Re: Parts identification
Posted: Mon Oct 22, 2012 10:30 am
by Jim Becker
Here is the L-22 bracket for Lo-Boys with Fast-Hitch.
http://www.tm-tractor.com/gim/22com_001.htm
Re: Parts identification
Posted: Wed Oct 24, 2012 12:53 pm
by tst
Here is the the same bracket that came on a 57 cub with a 54A plow on it, I could see no reason or purpose for it, wonder why it was put on it
Tim