Farmall Cub

Wont' he just have some extra peices if they aren't for a Fast hitch? I thought the cultivators were all the same, but for a Fast Hitch, you wouldn't need the rear toolbar brackets, nor would you need the rear horizontal bar at the top. Is that correct?

AL Farmall Boy wrote:Wont' he just have some extra peices if they aren't for a Fast hitch? I thought the cultivators were all the same, but for a Fast Hitch, you wouldn't need the rear toolbar brackets, nor would you need the rear horizontal bar at the top. Is that correct?

Close but not quite. The part at the top of the rear pressure rods has a smaller hole in the Fast-Hitch version. That can be handled with a pair of bushings. The bigger problem is on the left front. The pressure rod for the universal mounting frame was modified on later machines so there would still be a place to attach the lift rod for the Fast-Hitch. If you happen to have a later non-FH cultivator, it would have the modified pressure rod. If you have an earlier cultivator, you need the later part.

Very good information to know! I will have to do some image searches to check out the differences.

I have posted the 3 different types

Gotcha!! Yep....I believe I have a few of those pressure rods. Now I know how they attach! THANKS~!