Fri Nov 02, 2012 12:45 am
I have a knocking sound when in second gear. can anyone tell me what's wrong. and how to repair it.
Fri Nov 02, 2012 11:14 am
You will have to take the shifter tower off of the tranny. 1st thing is to check if the forks are loose, if so, tighten them up. You may also have a chipped gear .. then you will have to split the tranny and replace the gear. The Service Manual will have the procedure for that. Also these articles may be of help and of course for your Implement Mounting Hole problem:
Fri Nov 02, 2012 2:39 pm
Do some further investigation as Rudi mentioned. I would suggest jacking up the rear of the Cub, remove the rear wheels, and try to narrow down the source of the noise and exactly what may be causing it.
Fri Nov 02, 2012 3:57 pm
Check all your wheel center and rim bolts, to make sure none are loose.
Sat Nov 03, 2012 12:37 am
Thanks rudi, don and cubguy. I will try your suggestions. thankyou again.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.