Hydraulics Stalling Engine

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Hydraulics Stalling Engine

Postby zekie1997 » Sat Dec 01, 2012 12:40 am

Hey guys and gals. I have not been a member but a few days and I need some help here. I rebuilt my 1953 cub from top to bottom. I did the seals bearings compleate engine you know all of it. I have been getting it back together, had a few problems with carb had to take apart a few times. But what was bugging me was I set up just enough to check my engine out. It would run great for about five minutes and it sounded like it would lock up and cut off. It would start right back and would run great. What i FOUND WAS MY HYDRAULICS ARE BUILDING PRESSURE AND BOGGING THE engine down (sorry about the caps). Could some one help me with this. as long as i shift the hydraulics it runs great soon as I stop moving them bam locks down. Thanks Mark C
zekie1997
 
Posts: 8
Joined: Wed Nov 28, 2012 10:47 pm
Zip Code: 29349

Re: Hydraulics Stalling Engine

Postby Rudi » Sat Dec 01, 2012 1:14 am

Mark:

Sounds like there is a restriction somewhere. I would suggest reading the GSS-1024 - Touch Contro Serviceman's Handbook. There is a good troubleshooting section there as well. I would look at problem 9 in the trouble shooting section.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28471
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Hydraulics Stalling Engine

Postby Jim Becker » Sat Dec 01, 2012 1:56 am

Does it happen if you stop the hydraulics in the middle of the stroke or have you only tried stopping at the ends?
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11923
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Re: Hydraulics Stalling Engine

Postby John *.?-!.* cub owner » Sat Dec 01, 2012 10:48 am

Hydraulics will load an engine down, but should not stall it out once the engien is warmed up. sounds like you may have a couple of problems. Assuming you have the original touch control rather than an external system, the bypass should open before it builds that much pressure. Also , unless you are moving the lever there should be no load at all.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19461
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Hydraulics Stalling Engine

Postby Eugene » Sun Dec 02, 2012 8:16 am

Is this a new malfunction and did the touch control system work correctly since you have owned the tractor?

Has someone recently rebuilt the touch control system?
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12513
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: Hydraulics Stalling Engine

Postby Clark Thompson » Sun Dec 02, 2012 12:01 pm

there is a restriction orfase in the in the flow of oil in the lowering position. This is to keeping impliments from falling too fast. There should be a slight load when lowering the hydraulices but if it stalls the engine then there is only 1 of 2 tings it could be. The hydraulic fluid is too thick or the orfase is pluged. May have a piece of O ring or gasket blocking it. There is a filter screen on the orface or there should be.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
Clark Thompson
10+ Years
10+ Years
 
Posts: 1485
Joined: Sun Feb 02, 2003 11:01 pm
Location: Hubbard Ohio


Return to Farmall Cub

Who is online

Users browsing this forum: calcub, pieman, Rianna and 7 guests