Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Sat Dec 01, 2012 10:09 am
The bolster on my f-cub was cracked when I got it years ago I welded it and has been fine. I found a good bolster about an hour drive from here for sale cheep. I just thought it would be nice to have on the shelf if I ever wanted to change it. My f-cub is a 1947 are all the years the same? How would I tell if its for a standard or for a lowboy? THANKS Dan
Sat Dec 01, 2012 10:14 am
Look at the casting #'s and then check the TC-37 series Parts Catalogs .. 350 886 R21 in 1949. Then check the the casting codes - casting date codes
on TM Tractor's web site.
Sat Dec 01, 2012 10:22 am
Dan, a Loboy and FCub use the same bolster. They are also the same for all the years.
Sat Dec 01, 2012 10:24 am
Not a deal breaker, but check for broken off screws for the doglegs...they can be a tad difficult to get out .
Sat Dec 01, 2012 11:44 pm
danmcdonald wrote: I just thought it would be nice to have on the shelf
If the price is right, may be better than leaving the money in the bank.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.