Page 1 of 1
bolster
Posted: Sat Dec 01, 2012 10:09 am
by danmcdonald
The bolster on my f-cub was cracked when I got it years ago I welded it and has been fine. I found a good bolster about an hour drive from here for sale cheep. I just thought it would be nice to have on the shelf if I ever wanted to change it. My f-cub is a 1947 are all the years the same? How would I tell if its for a standard or for a lowboy? THANKS Dan
Re: bolster
Posted: Sat Dec 01, 2012 10:14 am
by Rudi
Dan:
Look at the casting #'s and then check the TC-37 series Parts Catalogs .. 350 886 R21 in 1949. Then check the the casting codes -
casting date codes on TM Tractor's web site.
Re: bolster
Posted: Sat Dec 01, 2012 10:22 am
by Barnyard
Dan, a Loboy and FCub use the same bolster. They are also the same for all the years.
Re: bolster
Posted: Sat Dec 01, 2012 10:24 am
by Dale Finch
Not a deal breaker, but check for broken off screws for the doglegs...they can be a tad difficult to get out .
Re: bolster
Posted: Sat Dec 01, 2012 11:44 pm
by lazyuniondriver
danmcdonald wrote: I just thought it would be nice to have on the shelf
If the price is right, may be better than leaving the money in the bank.