Starting question

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Starting question

Postby scrappyike » Sat Dec 01, 2012 5:04 pm

Having problems starting the cub. When I attempt to start her up and not pressing down on the clutch, it does a fast wind up. When I start with the clutch pressed down, it is a very slow wind up. Makes the sound of a low battery. The battery is brand new. Any ideas?
American by birth, Texan by the grace of GOD!
User avatar
scrappyike
 
Posts: 26
Joined: Sat Jun 16, 2012 8:42 pm
Location: Jefferson, OH
Zip Code: 44004
eBay ID: Netman52

Re: Starting question

Postby Barnyard » Sat Dec 01, 2012 5:43 pm

Pressing the clutch will cause the engine to crank slower on Cubs. It is best to make sure it is in neutral and the clutch is not pressed in.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17520
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Starting question

Postby Rick Spivey » Sat Dec 01, 2012 6:26 pm

You also should check all connections for proper ground, and wire size. 6 volt or 12?
Rick Spivey
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
User avatar
Rick Spivey
Cub Pro
Cub Pro
 
Posts: 1709
Joined: Sun Jul 01, 2007 10:07 pm
Location: SC, Simpsonville 29681
Zip Code: 29681
Circle of Safety Award
Circle of Safety: Y

Re: Starting question

Postby scrappyike » Sat Dec 01, 2012 8:15 pm

It is a 6 volt. I had it in neutral. Just was not sure if that was normal when having the clutch push in. Manual says to start it that way. Will try again. Thanks all
American by birth, Texan by the grace of GOD!
User avatar
scrappyike
 
Posts: 26
Joined: Sat Jun 16, 2012 8:42 pm
Location: Jefferson, OH
Zip Code: 44004
eBay ID: Netman52

Re: Starting question

Postby Bill Hudson » Sat Dec 01, 2012 8:42 pm

Ike,

Welcome back. You all moved in on Brown Road? Remember, I'm not that far away, as a matter of fact, going to church in Pierpont tomorrow. No time for a MicroFest tomorrow, however, one can be arranged at a mutually convenient time.

When you depress the clutch the pressure plate fingers rub a graphite throw out bearing. This causes friction (even thought the bearing is lubricated, supposedly) and thus the engine is laboring more during startup. As others have stated, start the Cub with the transmission in neutral and do not depress the clutch.

Gig 'em Aggies!!! Whoop, whoop!
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Bill Hudson
Team Cub
Team Cub
 
Posts: 6244
Joined: Wed Jul 26, 2006 10:50 am
Location: OH, Madison
Zip Code: 44057
Tractors Owned: :
57 F-Cub
64 Lo-Boy
68 Lo-Boy
52 F-Cub
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: dgrapes59, skwimjim and 4 guests