Fast Hitch conversion

Sun Dec 02, 2012 6:23 pm

What is a Fast hitch conversion to 3 point worth?

Re: Fast Hitch conversion

Sun Dec 02, 2012 9:00 pm

Jim, I don't think I have seen a conversion kit in person for a FH equipped cub? I have seen several of these styles though, some have been homemade:

http://www.ytmag.com/HK90_5835.htm

Re: Fast Hitch conversion

Sun Dec 02, 2012 9:11 pm

Well I havn't either seen one but the man says he has one and wants to sell it, so I guess I will go look at it.

Re: Fast Hitch conversion

Sun Dec 02, 2012 10:14 pm

jim turner wrote:Well I havn't either seen one but the man says he has one and wants to sell it, so I guess I will go look at it.


Definitely sounds interesting, good luck 8)

Re: Fast Hitch conversion

Sun Dec 02, 2012 10:39 pm

Not very useful in my opinion , spend your $ on fast hitch equipment My nickels worth
Boss

Re: Fast Hitch conversion

Sun Dec 02, 2012 11:18 pm

I have seen them on the 2 point hast hitch, but not for a one point.

Re: Fast Hitch conversion

Mon Dec 03, 2012 1:39 pm

Good advise Boss, think I'll just stay home

Re: Fast Hitch conversion

Mon Dec 03, 2012 2:31 pm

Found mine on Craigs 2 years ago and use it a lot

Image

Re: Fast Hitch conversion

Mon Dec 03, 2012 4:40 pm

Jim I think you had better go check it out. Looks good to me.

Re: Fast Hitch conversion

Mon Dec 03, 2012 7:19 pm

I went and looked at it, not near as good as yours is, he wanted $150.00 for it so I left it there.

Re: Fast Hitch conversion

Mon Dec 03, 2012 7:35 pm

tractordad wrote:Found mine on Craigs 2 years ago and use it a lot

Image


Gary, are you able to adjust the top link in and out on your setup? It almost looks like it has a clevis or something similar mounted on a threaded rod?

Re: Fast Hitch conversion

Mon Dec 03, 2012 8:11 pm

cubguy47 wrote:
tractordad wrote:Found mine on Craigs 2 years ago and use it a lot

Image


Gary, are you able to adjust the top link in and out on your setup? It almost looks like it has a clevis or something similar mounted on a threaded rod?


Yes, it is a threaded rod that is adjustable. Also, I can use the fast hitch adjustment from the seat if I need to correct the angle of the planter. The bottom two link attachments slide into the tube and are bolted through it. I just leave one bolted in place and took the other bolt out. I side the loose side onto the pin. Once the snap pin is in place, it won't go anywhere.

Gary