Switch to full style
Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Re: Replacement bolt kit?

Tue Dec 04, 2012 5:03 pm

ntrenn wrote:If you don't care about staying original, I've found Tractor Supply to be one of the better bolt places to shop in bulk. Fastenal is good as well (got my head bolts there)
If going aftermarket - go grade 8 on everything. The IH bolt torque specs are actually higher than grade 8 (using head bolts at 45 ft-lbs as an example) but you should be OK with grade 8. Grade 5 or 3 will get you into trouble.

Correct on the grade. 45 lbs on the head bolts is on the hairy edge of grade 8. McMaster sells a grade 9 bolt with a heavy hex head. They need to be trimmed to length but the extra tensile is good insurance. You want to trim head bolts to the proper length, otherwise threads will protrude into the coolant chamber. When they rust, you may as well have a welded nut on there when it comes to removing the head sometime in the future.

Re: Replacement bolt kit?

Tue Dec 04, 2012 8:04 pm

Could not agree more! You guys are great and hats off to bob for undertaking the task and being kind enough to share....
Post a reply