Moderator: Team Cub
tst wrote:The bolts are 1/2" not 7/16"
Boss Hog wrote:Dang , lazyuniondriver, Have you ever even taken a hydraulic pump off a cub before?
I see your pictures and I see one borrowed from TM to illustrate which bolt positions hold the pump together and which ones hold the pump to the block.lazyuniondriver wrote:tst wrote:The bolts are 1/2" not 7/16"
Looking at the picture, it is evident the pump has been off before, difficult access perhaps the very reason for substituting 1/2" head cap screws with the pictured 7/16" heads. The line block's fasteners retain the original 1/2" heads.
Boss Hog wrote:The bolts are 5/16 with a 1/2 inch head.
Users browsing this forum: alfreema, RaymondDurban, Rick Spivey and 9 guests