This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Crankshaft pulley removal

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Jdbfish
10+ Years
10+ Years
Posts: 103
Joined: Mon Nov 12, 2012 9:52 pm
Zip Code: 76502

Crankshaft pulley removal

Postby Jdbfish » Wed Dec 12, 2012 8:39 am

Another issue I've encountered that need to be addressed. I need to remove the pront crank pulley but do not have the tools required. Does anyone in the temple, Belton, Killeen, or Waco Texas area have what is needed to do this? Sure could use a hand on doing this please!

SPONSOR AD

Sponsor



Sponsor
 

Bob McCarty
Team Cub
Team Cub
Posts: 11827
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Crankshaft pulley removal

Postby Bob McCarty » Wed Dec 12, 2012 10:53 am

Here's a link showing how to do it with a bearing separator and two jaw puller which should be easy to borrow: viewtopic.php?f=11&t=44517

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
clodhopper
10+ Years
10+ Years
Posts: 807
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck
Circle of Safety: Y

Re: Crankshaft pulley removal

Postby clodhopper » Thu Dec 13, 2012 6:21 pm

I got a cheap bearing puller/ separator from harbor freight and it did good on mine. Front shaft was leaking like a sieve. Put in a speedy sleeve kit....no more leaks! :D

Jdbfish
10+ Years
10+ Years
Posts: 103
Joined: Mon Nov 12, 2012 9:52 pm
Zip Code: 76502

Re: Crankshaft pulley removal

Postby Jdbfish » Thu Dec 13, 2012 10:17 pm

Like clodhopper,I picked up a 14pc bearing puller set fromHF on the way home today. Worked like a champ, pulley came right off very easily. Very surprised and happy! Thanks everyone...

CapeCodCubs
10+ Years
10+ Years
Posts: 3328
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
1950 F Cub Fast hitch
1965 Loboy Fast hitch
1966 Loboy with 1000 loader
1976 International Cub
several walk behind garden tractors
(20) FastHitch implements
tons' of cultivating and planting stuff
C-16 Cub Middlebuster
(2) A33 Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Cole 250# fertilizer hopper with chain drive.
Location: MA, Dartmouth

Re: Crankshaft pulley removal

Postby CapeCodCubs » Fri Dec 14, 2012 11:01 am

Thanks for the useful link Bob...
Image

User avatar
Hengy
10+ Years
10+ Years
Posts: 7153
Joined: Sat Feb 18, 2006 8:12 pm
Zip Code: 15101
eBay ID: lacrosseorgans
Skype Name: Mike.Hengelsberg
Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow
Circle of Safety: Y
Location: PA, Allison Park (Am Hengelsberg)
Contact:

Re: Crankshaft pulley removal

Postby Hengy » Fri Dec 14, 2012 11:33 am

I need to tackle this job on Lewis, and am going to try the bearing separator method when I do it. Since Lewis is going to get a complete double-pump rework, I haven't decided whether to start at the front and work backwards (painting as I go) or start at the rear and work my way forward. Depending on which way I go will determine when I hit what project!
Mike (Happy as a Lark in Allison Park, PA)
Image Image

Check out my Restoration Thread (1955 Cub, Lewis)

User avatar
clodhopper
10+ Years
10+ Years
Posts: 807
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck
Circle of Safety: Y

Re: Crankshaft pulley removal

Postby clodhopper » Fri Dec 14, 2012 8:55 pm

Hengy wrote:I need to tackle this job on Lewis, and am going to try the bearing separator method when I do it. Since Lewis is going to get a complete double-pump rework, I haven't decided whether to start at the front and work backwards (painting as I go) or start at the rear and work my way forward. Depending on which way I go will determine when I hit what project!

Looks like I'M starting in the REAR... :roll: viewtopic.php?f=1&t=75316


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 28 guests