the rear bearing goes out the PTO shaft side of the case. You have to remove the rear cover for big paws like mine
David C.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Removing rear roller bearing on spline shaft
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- David C
- 10+ Years
- Posts: 611
- Joined: Tue Dec 02, 2003 9:17 pm
- Zip Code: 47141
- Tractors Owned: 1949 Farmall Cub, 1970 135 Massey Ferguson, 1970 175 Massey Ferguson, 1964 Cub Cadet Model 70. 1977 Farmall 140 (Granpa's)
- Location: Marysville, Indiana
I milled down a piece of long brass at work just shy of the bearing I.D. with a shoulder on it. I did ding up the inner shield a little, but worked it out. The larger rear shield is on a step and it was drove back in w/ a socket during installation...
DavidC.
DavidC.
I may be old but I got to see all the cool bands
Who is online
Users browsing this forum: lakesurfer, Leewebb7 and 23 guests