Page 2 of 5

Re: cub snowblower

Posted: Sat Dec 29, 2012 5:52 pm
by Don McCombs
OK. I see, Chris.

Re: cub snowblower

Posted: Sat Dec 29, 2012 6:10 pm
by 64/67lo-boy
What size pulley was used on the belt driven blowers for the cub?

Re: cub snowblower

Posted: Sat Dec 29, 2012 6:22 pm
by Don McCombs
Pete,

I don't think that there ever was a PTO driven snowblower for the pre-154 Cubs and LoBoys. See the discussion above.

Re: cub snowblower

Posted: Sat Dec 29, 2012 6:47 pm
by 64/67lo-boy
I just assumed that if Danco had one that ran off the PTO that there must have been a pulley involved. May be a belt driven shaft that ran under the tractor? Or May be an engine mounted on the back with a pulley and belt that utilised the mower mule drive pullies? Sure would like to see some dockumentation or parts manuals for them.

Re: cub snowblower

Posted: Sat Dec 29, 2012 6:50 pm
by Jim Becker
Look at the pictures Don posted above.

Re: cub snowblower

Posted: Sat Dec 29, 2012 7:32 pm
by Don McCombs
Pete,

There is a shaft that runs directly from the auxiliary engine to a gearbox on the blower. The Cub's drive train/PTO is not used.

Re: cub snowblower

Posted: Sat Dec 29, 2012 7:41 pm
by Scrivet
64/67lo-boy wrote:I just assumed that if Danco had one that ran off the PTO that there must have been a pulley involved. ....

Running a snow blower off the PTO would only work in the right conditions (1 in a 100?). Depth of snow and water content would play a big part; in that if you were getting into deeper or wetter snow, you would need to slow down the tractor, which would slow down the snow blower, which would require you to slow down the tractor even more, which would slow down the snow blower even more, which would require........well you should get the idea by now. From my limited small walk behind snow blower experience it's best to have the blower turning fast and advancing slow in the heavier stuff. I wouldn't be surprised that even with a separate engine running the blower there would be times when you'd be feathering the clutch to slow down the ground speed even in first gear.

Re: cub snowblower

Posted: Sat Dec 29, 2012 7:46 pm
by Don McCombs

Re: cub snowblower

Posted: Sat Dec 29, 2012 7:46 pm
by cub47
So am I correct in assuming that the caption in Ken Updike's book is not correct for the fact that it tends to leave the impression the PTO on the Cub is actually used? From this thread and Don's pics, I am assuming only the auxiliary motor was utilized?

Re: cub snowblower

Posted: Sat Dec 29, 2012 7:49 pm
by Don McCombs
That's my understanding, Brian. Wish we could get a hold of a brochure or manual to really verify that. I just added a search on eBay. We'll see if anything shows up.

Re: cub snowblower

Posted: Sat Dec 29, 2012 7:51 pm
by Scrivet
Maybe the PTO was used to start the blower motor?????????????????

Re: cub snowblower

Posted: Sat Dec 29, 2012 7:58 pm
by cub47
this is off topic, but did the street sweepers that were made for a Cub or Cub Loboy run off of the PTO or an auxiliary motor similar to the snow blower scenario?

Re: cub snowblower

Posted: Sat Dec 29, 2012 8:05 pm
by Don McCombs
In this photo, you can pretty clearly see the shaft coming from the aux engine.

Image
Photo courtesy Wisconsin Historical Society

Re: cub snowblower

Posted: Sat Dec 29, 2012 10:33 pm
by farmallcub49
The rotary brooms were run of the PTO, at least mine is.

Re: cub snowblower

Posted: Sat Dec 29, 2012 10:36 pm
by Eugene
farmallcub49 wrote:The rotary brooms were run of the PTO, at least mine is.
Same here, PTO driven on the one I own.