Farmall Cub

I have a 1957 parts price list for a Gravely snow blower.

This was going to be my summer project (before 2 surgeries) - 42" Sears snowblower, mounted on rear w/v-belt drive off of pulley attachment. Drive pulley sized to drive blower @ correct speed @ full throttle in reverse! May have to get Sonny's input to weld up the mounting bracket but seems like it would work to me?!? 2013 is a new year!!! Dusty B

Dusty B wrote:............ but seems like it would work to me?!? 2013 is a new year!!! Dusty B

Dusty, I would loosely equate running a snow blower off the PTO with a 59-60" triple spindle mower deck. It works fine in light to moderate grass but it doesn't take much to get to where it bogs the tractor down. The cub can run it but only under the right conditions. The snow blower will work but will you be able to use it effectively in every snowfall, or just the light fluffy ones that come from the southwest in the afternoon on Thursdays? My OPINION, and it is just my opinion, is that you are wasting your time. Of course I'm rooting for you to prove me wrong.

When building a rear mounted item such as a snow blower, think about your age and health. Arthritis in you neck and shoulders or back tends to make something that was easy to do when you were 30 almost impossible at 60. turning around far enough to see both sides of a rear snow blower for an hour or two cleaning roads is one of those problems.

I have toyed around with the idea of a tractor mounted snowblower but will stick with a walk-behind blower for several reasons. Manuverability. Size. Weight. Manuverability. Durability. Parts availability. Manuverability. Storage. Ease of operation. Manuverability.

Perched on a Cub with your head high above the discharge chute is not a desirable location if the wind is blowing. Personal blizzard.

I'm with Carl, unless you have a very large or long area to keep clear. Then, a larger tractor and blower combination is the way to go.

When I bought #48 it came with a Haban blower. it will clear a 45 inch path. It was modified to attach to the front plow bracket. It came with a belt that runss from the blower back through the mule drive and to the PTO. I am thinking it would be better with a 12 horse B&S or larger. Fab a Bracket Off the back draw bar.

That looks like a very nice blower - and 42" isn't a bad width. You would be right though - best if it is powered by an auxilliary B&S etc.

As far as some of the points Carl and Don raised ... these are easily addressed. I for one am not a fan of 2" of frozen snow on my face and the rest of me. BtDt more times than I care to remember and certainly never want to repeat again. Part of my snowblower project includes a vital part of Rick's project:



For those of us with long driveways and a Cub with no access to larger tractors on a permanent basis, then this project makes sense. I do agree with a couple more of their points, a project like this is not for every one just like my splitter project isn't for everyone. But as another chum stated, those of us on the forum that a well kinda nutty - we like the challenges and of course we like to be able to see just what our Cubs can do. It is also a learning experience. I know I would never have learned diddley about hydraulic power if I had not done blade and splitter project. I am going to take what I learned there and eventually have hydraulically operated chute controls both direction and elevation. I am going to have Cab as well and have been assembling some parts/locating other parts and ideas on a Cab.

I already have found 1 - 6 volt wiper motor from an old VW. Hope it still works. It has been in a barn for 30 years so I figure a rebuild should take care of that. And Romeo (Dad's cousin) had this for sale a couple years ago ... nice idea and within my fab skillset.

I had these in my pictures from Cubarma 2006.



More pictures at
http://home.centurytel.net/ejpuckett/Snow%20blower/

what kind of engine is that, looks like a huge engine. not your typical K series kohler or B&S, is it? is that the danco??

Not a Danco. The engine is a Wisconsin. Homemade.

I found a 48" snowthrower off one of those case "high-wheel" garden tractors on craigslist... pretty cheap I think.

It would be perfect mounted on my '53.

Do I *really* need another project?

I had a snowblower (IH50) on my 184. Threw snow well when the snow was less than 6". The creeper gear solved the forward speed issue. The blower was powered from the PTO. There was a belt running from the PTO to the driveshaft (under the tractor) and being a numbered series, had a live PTO. The blower took everything the 184 could do and had to run wide open. It was single stage and threw the snow about 4-5' to the side.
I sold it this year in favor of a walk-behind as my driveway is not big enough to warrant the tractor changeover time.

The IH-50 is a single stage snow thrower and not as efficient as a 2 stage snow blower. It lacks the impeller and the auger tube is really huge. Again, the PTO powered blower is a real limiter - if the blower is powered separately then sufficient power can be transmitted to the auger or auger/impeller to move the snow at high speed while allowing the tractor to move forward at a slower speed.

Matt:

Yes you do need another project

64/67lo-boy:

One of the problems with smaller units (less than the width of your Cub) is trying to navigate around the left overs - front and rears end up on the ridges and that can cause problems. But, there is a solution - cutter wings - extend the effective width of the blower by adding cutter wing extensions to both sides of the blower. If your Cub has a 52" track then you need 7" or 2 3-1/2" cutter wing extensions. These will gather in the snow to the auger and widen your swath without bogging down the blower. I see these all the time on older large units that are modified for newer tractors.

I really gotta get off me duff and get this done. If I can hold off any other med issues, I need to get this one done and ready for next year. A little too cold to do it now

Hey Rudi this what you are talking about. I need one on the other side so it will be 48" wide. Im thinking of getting a used riding mower with a 17.5HP and an electric clutch. Would have electric start and all. Same as you, would like to have it going for next year.