Page 1 of 2
Plowed some snow today
Posted: Sat Dec 29, 2012 8:53 pm
by Dan Robertson
I use the center blade most of the time. The front blade to pile the snow up high. When making multiple passes with the blades at angle I set the front blade 3 to 5" off the ground, and the center blade (which is a 6' blade) down fully, or (up an inch or so when on gravel). This helps with moving the snow to the side.
Here are a couple video clips my wife took today of me clearing the snow
http://youtu.be/A1UhrZhg7iI http://youtu.be/fgvSbhuVIbo
Re: Plowed some snow today
Posted: Sat Dec 29, 2012 9:00 pm
by Yogie
Looking good, all I got was more mud.
Re: Plowed some snow today
Posted: Sat Dec 29, 2012 9:02 pm
by Barnyard
Looking good Dan. You gotter done pretty quick. Do me a favor though and keep all that snow out yoyr way. I'm not ready for it just yet.
Re: Plowed some snow today
Posted: Sat Dec 29, 2012 10:04 pm
by lazyuniondriver
Very impressive set up.
Re: Plowed some snow today
Posted: Sun Dec 30, 2012 11:06 am
by Rudi
Dan:
I have always been impressed with what you have done with your Cub
Looks like you had some fun judging by the smile on your face. Keep enjoying the snow.
We just got hit with a Nor'easter. Well over 16" down already and still not done. Will be late tonight before we even get plowed out. Yahhhh - seat time
Re: Plowed some snow today
Posted: Sun Dec 30, 2012 1:23 pm
by Bob McCarty
Dan, Tell your wife she did a good job with the videos. Personally, I don't think I could keep track of all those hydraulic levers.
Bob
Re: Plowed some snow today
Posted: Sun Dec 30, 2012 1:30 pm
by Bill Hudson
That is a serious snow pushing machine.
Re: Plowed some snow today
Posted: Sun Dec 30, 2012 8:37 pm
by EarlyCub49
Real neat setup, I like it
Bruce T.
Re: Plowed some snow today
Posted: Sun Dec 30, 2012 9:32 pm
by Mr Ziffel
Great Video, I had fun watching. Your controls look like a B-17 cockpit .
Re: Plowed some snow today
Posted: Sun Dec 30, 2012 10:40 pm
by Hengy
I really like all the hydraulics, and you obviously know which ones work witch gizmo because you operated it flawlessly. I also like how much extra lift you get with that separate cylininder operating the lift!
Re: Plowed some snow today
Posted: Mon Dec 31, 2012 2:48 pm
by Jack
is anyone still making the drink holder and mirror set-up like you have on your tractor?
Re: Plowed some snow today
Posted: Mon Dec 31, 2012 3:42 pm
by Bob McCarty
Jack, Those were originally made by Kub Kraft, which is no longer in business. I'm not aware that anyone is making them now.
Bob
Re: Plowed some snow today
Posted: Wed Jan 02, 2013 7:34 am
by Paul Van Benschoten
Forum member TST is making them now. He has adds for some of the things he makes in the Premium Advertisers Forum.
Re: Plowed some snow today
Posted: Wed Jan 02, 2013 7:36 am
by Jack
Thanks Guys
Re: Plowed some snow today
Posted: Wed Jan 02, 2013 12:05 pm
by Rudi
Dan:
I watched part 2 again, and I am really intrigued by the mid-mount blade. Where did you source that 60" blade and can you post detailed pics of the assembly and mounting for the midmount
I really like how you can bust down the snowbank and clean all in one pass - even wet snow like that. Really cool.
