Moderator: Team Cub
Dan Stuckey wrote:Getting ready to fix the leak coming from my steering gear. It looks like it is coming from the gasket between the main and lower steering gear housing. I'm wondering about supporting the front of the Cub while the axle is being removed. Is the oil pan beefy enough if I were to stack square billets of wood beneath it and have the weight on the bottom of the pan . Of course I will have a large enough piece of wood to distribute the weight over the lower part of the pan.
Also and links pertaining to this job would be appreciated. Thanks
Dan Stuckey wrote:Thanks guys for the imput. Remembered I did make up a set of splitting stands when I changed out the engine. Guess I'll try them and also block up the oil pan just to make sure it doesnt nose dive.
Users browsing this forum: Arthur Luke, Clip, Paul Van Benschoten, trice and 11 guests