Cub Database Update

[Alan Riley]

I sent my info to Trent a few years back but it never did get included into the database. I'll see if I can find it on the old computer...it's too cold right now to crawl around out there looking for all those numbers!

But you're in Louisiana Here in Ohio it was 8 degrees this morning.

Denny, if the temperature is below 60 degrees, it's too cold for this old man who has lived in the south all of his life!! It was only up into the 50s today...

[Chris D]

59 cub. Fast hitch, converted 12 volt, zenith carb, other than that original tractor, low hours, original rear tires
S/n. 214912 J
engine numbers: 251341R7. 10-28-E
Trans 351530R7. 11-12-E
Front bolster 12-4-E
Torque tube 351686-R3. 10-27-E
Standard seat
Color red

[RaymondDurban]

Thanks Chris, got it recorded!

[Alan Riley]

I sent my info to Trent a few years back but it never did get included into the database. I'll see if I can find it on the old computer...it's too cold right now to crawl around out there looking for all those numbers!

I'll be happy to add what you can find! Thanks for looking!

Thanks to everyone that has sent me their numbers. The current Database listed on Rudi's site has 656 Cub entries. I'm currently up to 1060!
Keep 'em coming!

Raymond, I found it on the old computer. I need to make a few changes to update it (replaced engine) then I'll get it off to you.

[RaymondDurban]

...
Raymond, I found it on the old computer. I need to make a few changes to update it (replaced engine) then I'll get it off to you.

Alan, if you could send the original information as well as the new information, that would be great. I can use the replacement engines numbers (SN and cast code) as well as the originals information.
Thanks,
Raymond

[Alan Riley]

...
Raymond, I found it on the old computer. I need to make a few changes to update it (replaced engine) then I'll get it off to you.

Alan, if you could send the original information as well as the new information, that would be great. I can use the replacement engines numbers (SN and cast code) as well as the originals information.
Thanks,
Raymond

Ok, will do. I still have the original engine that I may reinstall someday.

Thanks,
Alan

[RaymondDurban]

Will you be using the current info on the Cub Registry link at the top of the page? My info is there but not on the attached sample.
Wally

Wally, I'm sorry but I completely missed your post.
I haven't gone through the registry yet, but hope to get to it this afternoon.
-Raymond

[Tezell]

Raymond,

Here is mine:

53 FCUB

162870J
IH Carb
Red
Post Seat
Converted to 12 volt
Finals 12/23/X
Engine 8/19/X
Engine Serial #FCUB165068
Trans 1/5/Y
Touch Control 1/2/Y
Everything Seems to be original

50 FCUB

#117210
IH Carb
6 Volt
Red
Post Seat
Finals 8/10/T
Engine 8/22/W
Engine Serial# ?????
Trans 7/26/T
T/C 7/11/T

Everthing but the motor seems to be original


53 FCUB
#177069J
Zeinth Carb
6 Volt
Red
Post Seat
Finals ??
Engine 9/9/Y
Engine Serial #180388
Trans 8/27/Y
T/C 5/29/Y

51 FCUB
IH Carb
Post Seat
6 Volt
Red
Serial # 139672J
No other info on this one

71 FCUB
Deluxe Seat
Yellow-I painted Red
12 Volt
IH Carb
Serial #238472J
Engine 9/3/S
Engine Serial # 284995X
There are no casting numbers that I can find on the Trans,T/C, or Finals
Everything on this Tractor is original

61 LoBoy
Serial #15462J
IH Carb
Yellow-Someone painted it red
12 volt conversion
Regular Seat
Engine 9/20/G
Engine Serial # FCUB238828
Finals ??
Trans 9/22/G
T/C 6/29/G
Everything on this tractor is original

[RaymondDurban]

Thanks Tim, I'll get them loaded tonight!

[stupidcub]

Did not see mine in there.
1948
S/N 43894
I will try to get more #'s when it warms up here. That could be April.

[Stanton]

I submitted info to Trent(?) years ago, but will gather and sent it to you next week. Will try to get what you asked for: tractor and engine serial numbers of each tractor.

Thanks for tackling this--it's a big job! Have a good weekend.

[RaymondDurban]

Thanks Fellas! I appreciate the leg work!

[AL Farmall Boy]

Raymond,

Not sure if you've got mine or not; but here goes. I believe they are on Rudi's database, but some could have been added since. Let me know if you want me to get any particular Engine Serials (if not all), and the casting codes. Haha, it'll be quite the task; but I'm up to it if you want it. If additional information is required, remind me and I'll get it to you as I have time. This was convienent to send since it was already entered in my spreadsheet. Sorry for the overload!!

Wow, that's quite the collection! I really need a little bit more information for each tractor to plug it in the database. If you take the Cub with the missing SN tag with engine SN 2890, this engine could have built in '47 or '52, depending on if the engine was originally out of a Cub tractor or power unit. The engine PN and cast code will let us know and I'll plug it in accordingly.
With the rest of the tractors that have the SN missing, if you get me the engine SN, I can still plug it in the database with what ever engine cast codes you can get me. Its no rush. I'll be updating the listing periodically as more information comes in.
Send me a PM with your Email address and I'll send you an Excel file that I have made up to record numbers. It might come in handy with that many tractors!

Yeah, what I sent you is a screenshot of my excel spreadsheet. It contains much more information (ie. purchase date, purchase price, description, implements, etc.), however I didn't include it since it would be irrevelant to your database. I will see what all I can get you on Sunday (if'n I don't forget). Some of them (I'd say around 8-10) are parts tractors. Should I note that as well?

[RaymondDurban]

Yeah, what I sent you is a screenshot of my excel spreadsheet. It contains much more information (ie. purchase date, purchase price, description, implements, etc.), however I didn't include it since it would be irrevelant to your database. I will see what all I can get you on Sunday (if'n I don't forget). Some of them (I'd say around 8-10) are parts tractors. Should I note that as well?

If you don't mind, that'd be great. Any information you can provide I'll use as best I can.
With as many as you have it may be hard to keep track of, but if you know for instance that you took the head off a parts tractor to install on a runner, then try to list it as it was so that we'll know how they originally were. I don't need everything right away. I'll be adding more info in the months ahead as more information comes in. If you want to send information in piece meal then that'll be fine too. I can always update your tractors as you record the numbers.
Thanks for the effort, it'll be put to good use!

[Harold R]

Like others have said....thanks for the good work. This will be a handy reference when done.