This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Right hand Lo Boy cut fender from factory
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Right hand Lo Boy cut fender from factory
Last edited by Boss Hog on Thu Jan 10, 2013 9:06 am, edited 2 times in total.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 1629
- Joined: Mon Jan 29, 2007 7:09 pm
- Zip Code: 30114
- Tractors Owned: 1951 cub "Ms. Scarlett"
1962 Leora's loboy "Starburst" - Circle of Safety: Y
- Location: GA, Canton/Waleska
Re: Right hand Lo Boy cut fender from factory
IS that suppose to accommodate the fast hitch crank, is that why it is cut?
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
I think it was for ease of getting on and off. Here it is in the parts book
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
Re: Right hand Lo Boy cut fender from factory
They should have done that to ALL the lowboys
They are harder to get on than a tall cub with that fender moved forward with the rotated final.
I have had 3 lowboys-hated each one because they are so hard to get on.
They are harder to get on than a tall cub with that fender moved forward with the rotated final.
I have had 3 lowboys-hated each one because they are so hard to get on.
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: Right hand Lo Boy cut fender from factory
A sickle bar makes a great step to get on a Low Boy
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- 10+ Years
- Posts: 4949
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Right hand Lo Boy cut fender from factory
Must've only been on the very last ones... My 1966 had two full fenders.
-
- 10+ Years
Re: Right hand Lo Boy cut fender from factory
My "Last known Ser. # '68 model had 2 full fenders
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Right hand Lo Boy cut fender from factory
The funky drawing notwithstanding, that page of the parts book shows the same part number right and left. In the absence of some other solid proof, I believe that fender was modified.
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Right hand Lo Boy cut fender from factory
I agree with Jim. From working in a manufacturing facility during my working career, if that fender is cut completely straight from top to bottom it's probably done from someone at a shop or home. The IH factory would have stamped the sheet metal to the proper size, then placed that sheet in the same press as a normal fender. Boss, do you have any pictures from the other side focused on the cut??
Thanks,
Rick
I'll guarantee I could scribe some lines and cut a fender off to duplicate yours(and you couldn't tell them apart). If someone would scale a picture to resemble your fender, you'd see a drastic difference than the poorly drawn manual pic.
My .01
Rick
Thanks,
Rick
I'll guarantee I could scribe some lines and cut a fender off to duplicate yours(and you couldn't tell them apart). If someone would scale a picture to resemble your fender, you'd see a drastic difference than the poorly drawn manual pic.
My .01
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: Right hand Lo Boy cut fender from factory
I have personally seen this fender up close and I can tell you if it was back yard made it's one heck of a job. Looked good enough to be a factory/dealer done modification to me. The truth may never be known unless there are more out there....
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
Re: Right hand Lo Boy cut fender from factory
so are you saying the page out of the manual isn't genuine?
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
I was waiting for someone to ask
It is factory , I would think that most of you would have more faith in me than to think I would pass something home made off as factory. I did a lot of research on it to make sure before. But behold the unbelievers here are the pics
It is factory , I would think that most of you would have more faith in me than to think I would pass something home made off as factory. I did a lot of research on it to make sure before. But behold the unbelievers here are the pics
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: Right hand Lo Boy cut fender from factory
Not only to back up these recent pictures, but I done a good search thru yahoo images of lowboy cubs and sure enough I came across a good handful in just a few minutes of looking. Some were round nose lowboys and some square nose. However there were lots on there with full fenders these fenders were put on them from a factory when built.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Right hand Lo Boy cut fender from factory
by the way that is factory paint i believe too
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
Re: Right hand Lo Boy cut fender from factory
OH NO, the Correct Police aren't always Correct?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 118
-
by Command52
Sun Jun 27, 2021 3:03 pm
-
-
C22 Mower Help (pitman, Knife Clips, Fender Rod)
by jbevard » Mon Mar 18, 2024 9:39 pm » in Farmall Cub - 5
- 235
-
by jbevard
Tue Mar 19, 2024 8:12 pm
-
-
- 10
- 559
-
by Cub parts man
Tue Feb 20, 2024 9:48 am
-
-
Rear fender warning light mount pics Attachment(s)
by MrBee » Sun Jun 27, 2021 3:58 pm » in Farmall Cub - 2
- 286
-
by MrBee
Sun Jun 27, 2021 9:55 pm
-
-
- 0
- 110
-
by wrz
Tue Sep 26, 2023 5:50 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 7 guests