Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
The holes are right, but look at the SHAPE of that right fender.
It doesn't go straight up for 6" like that. It curls right around and goes straight into the top arc.
The left fender's shape in the first drawing is about right, but the right fender is totally wrong.
Either the original Cub had two different-shaped fenders, or someone was allergic to drawing right fenders.
In order to keep the fire burning i don't know how to transfer the ad from craigslist but there is an ad on craigslist in Winston Salem,NC for a 1949 cub lo boy so this could have been another one of a kind.
the drawing isnt perfect but it proves that fender was in the works at some point .
Last edited by Rob in NH on Fri Jan 11, 2013 4:18 pm, edited 1 time in total.
Naw, just someone that doesn't know.
2 more odd ball from IH
Never machined but made their way to the dealer
I may do a contest on them
I dont think they ever tooled up to make them in a mold or stamping process. Wonder was that yellow primer ever available to a dealer?
I took a picture of a pair of fenders, tried to come close to the angle of the parts catalog drawing. The lower tape line is between the extreme end points of the fender. The upper line starts at the same point in the rear. The other end hits the roll of the fender directly above the two holes in the fender.
Jim you have the tape below the holes on the real finder , Draw a line below the holes on the fender in the parts book and see what you come up with, whole new ball game
I am using the shape of the fender for reference points rather than the holes. The holes seem to be the least reliable part of the drawing. After all, in the drawing, the front hole is only half as far from the top roll of the fender than the rear hole is. We know that dimension is the same, both front and rear, on all fenders.
Anyway, you can move the line up and down any amount you want and as long as you keep it parallel to the holes (or the any pair of symetrical points on the roll of the fender) it is still going to be horizontal. Likewise, you can move the line in the parts diagram up or down and it is never going to end up at the angle of the upper tape in my picture.
But is it all open to whatever interpretation you want to apply. That is why I posted my picture with description but no interpretation or commentary. The picture spoke for itself.
Your black line on the drawing makes it pretty obvious. It is almost exactly half way up the front edge of the fender and is overlapping the attachment bolt area of the fender. The line drawn on your fender is only about a third of the way up the front edge but is way above the attachemnt bolt area. Clearly, your fender has about twice as much front edge as the drawing.
I know my fender does not look like the drawing in the book, but the drawing in the book is a cut fender, though it be a poor drawing as you have said.
WOW....go to work for about a week and look what I come back too!! haha.
To me that fender looks to be factory made or custom made. It doesn't look like it would have been "Cut" from an original IH fender. One of you guys try drawing the "missing" portion of the fender in. From looking at Boss' pictures, it seems to me that the front half of the fender would be much longer than the rear half (bi-secting it at the attachment point).....proving that it was custom made and not "cut". Also, the fact that it was listed in the parts diagram tells me that IH had something to do with it.
If Boss could take that fender and do some sketching with it using it as a trace pattern. I believe he could draw up the missing portion as the standard fender would have. Then do some measuring and compare with a regular standard fender. Just a thought.
Looking at Jim's fenders set on an angle like the parts book makes Jim's look like it is straight up and down. The line David drew on the last pic also gives that impression. That is probably what the person drawing the one for the parts book had in mind. Based on Jim's picture, David's drawing and what the IH service manager told me today, my guess is any of the cut fenders were probably done after they left the factory.
Who is online