Switch to full style
Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

replaceing the pto seal on my cub

Wed Jan 09, 2013 11:33 am

I am trying to replace the pto seal on my 49 cub, Gary mentioned I could possibly drill holes in the seal insert metal screws and pry out, that isn't working, any other ideas without taking the flange off?

Re: replaceing the pto seal on my cub

Wed Jan 09, 2013 11:40 am

Do you have access to a slide hammer? Check with an auto parts store. Sometimes they have loaner tools.

Re: replaceing the pto seal on my cub

Wed Jan 09, 2013 12:28 pm

Talked too soon, found a bigger bar and it popped out thanks.
Attachments
pto seal.JPG

Re: replaceing the pto seal on my cub

Wed Jan 09, 2013 4:57 pm

Make sure everything is clean, smooth and well lubed when you tap the new one back in. Take your time. Little taps. :D

Re: replaceing the pto seal on my cub

Wed Jan 09, 2013 6:56 pm

10-4 thanks.
Post a reply