Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Jan 11, 2013 4:49 pm
I have been planning on recovering my pan seat with black canvas (as soon as I can get my wife to sew it). I have the seat pan ready - painted, old cover remnants pryed out of the lip, and the foam cut and cemented in position. I am now having second thoughts about using the canvas, as it can easily get soaked if it gets rained on. I am now thinking of using a vinyl fabric instead. If I go that route, what color would be most appropriate? My recollection is that our Cub had some sort of silver-looking canvas material when my Dad purchased it. Any suggestions would be appreciated.
Fri Jan 11, 2013 5:39 pm
it can be treated with a water repellant.
Fri Jan 11, 2013 5:48 pm
What kind of water repellant? I thought about Scotchguard, but I was not sure if that was what it is used for?
Fri Jan 11, 2013 6:18 pm
Black gets a bit warm, in the sun. I'd suggest a lighter color. Ed
Fri Jan 11, 2013 6:20 pm
i've used scotch guard but i'm sure there are other products that are as good or better.
Fri Jan 11, 2013 9:07 pm
Go to your local WallyWorld aka Wal-Mart, the camping section and you can buy the aerosol cans of waterproofing compound used to waterproof tents. A few coats of that compount (let dry well between coats) and it should be perfectly water proof. I would re-apply once a year just as you would for a tent. Cans are about $3.99 here.
Fri Jan 11, 2013 10:35 pm
If you can find my post on seat recovering you can see how I used a combo of red & white vinyl (boat seat material) from JoAnn fabric. I also made one up w/grey vinyl. ??? pm me. Dusty B
Sat Jan 12, 2013 12:43 am
Stanley....I have actually taken on the task of recovering a seat too. This would be for the 1975 Cub I'm restoring that had the factory pan seat with 95% of the original covering. It seemed to be a (forgot what it's called) "hatched" type rough vinyl (little squares) that was silver or grey in color. After debating...I'd rather go with the vinyl becuase it has a more cleaner look than the duck canvas....plus it is more weather friendly and easier to work with when reupholstering.....seems like it at least.
I went into the fabric store here, and noticed that they had black and white vinyl. I don't know if you can get other colors or not; but since I have a yellow and white cub, I'd like to do either Yellow & White vinyl, or Yellow & Black vinyl.....maybe even have the "IH" logo or "Cub" sewn in it somehow.
How did you open up the lip? I ended up using a hammer and chisel. It worked great, but ALOT of hard work!!
As hard, stiff, and strong as that metal on the lip was; I'm surely not looking forward to closing it back up when it comes time to install the new cover!!!
Sat Jan 12, 2013 10:23 am
I opened the lip just as you did, with chisel and hammer. I held the pan on edge against a wood block on the floor for support as I slowly hammered and pryed my way around the perimeter of the seat pan. It was sure a slow job. I may go back to the fabric store and take a look at what type of vinyl material they have. You know, I just had a thought. Bonds Brothers (auto paint & upholstery supply) downtown may have a better selection of vinyl. I may go there Monday and see what sort of selection that they have. I prefer to keep the color silver or black, for the authentic appearance.
Sat Jan 12, 2013 9:54 pm
Sounds good Stanley, and yeah, Bonds Bros. would be a good idea. Keep me posted on what they have. I think the yellow/white vinyl combo would look great and still look like it was original.
Mon Jan 14, 2013 3:24 pm
thiggy wrote:...I am now having second thoughts about using the canvas, as it can easily get soaked if it gets rained on. I am now thinking of using a vinyl fabric instead...
I bought duck canvas from Jo-Ann Fabrics and my wife sewed it. Before buying vinyl, you'll want to make sure your wife's sewing machine can handle it.
Mon Jan 14, 2013 7:42 pm
We just bought 1.5 yds of grey marine waterproof vinile . On sale at Hancock fabric 50% off. Also got some additional padding for it.
Mon Jan 14, 2013 11:12 pm
Tnanks, Stanton. The machine's capability has been one of my concerns in selecting an upholstery material.
Tue Jan 15, 2013 3:54 pm
We were making some beanbags out of duck cloth for a cornhole game, and discovered a friends sewing machine couldn't sew the duck cloth. The vinyl I looked at at the Fabric store (Michaels) was pretty thin and plyable, so I'd imagine it would handle it easier.
Tue Jan 15, 2013 4:00 pm
AL Farmall Boy wrote:The vinyl I looked at at the Fabric store (Michaels) was pretty thin and plyable, so I'd imagine it would handle it easier.
If it is not marine grade, it will not hold up, and most likely will not be waterproof.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.