This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Built 3 of these this weekend
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 505
- Joined: Thu Jan 06, 2011 5:46 pm
- Zip Code: 27265
- Tractors Owned: Ford 2000
78 Cub Fast Hitch Red
78 Cub Red
76 Cub Red
75 Cub (Not Long Stripe) Yellow
70 Cub Yellow Fast Hitch
53 Cub 151 Disk Plow
69 Cub - Circle of Safety: Y
- Location: NC
Built 3 of these this weekend
Had a cole planter setting around and thought i would make it more useful to the fleet and built me a one point hitch for it. Have one I was thinking of parting with, (not sure yet) so though i would make one for it to. Well I might run across one down the road so i will make one to have on hand, I guess i will stop there. Sometimes it is just as easy to make more then one when you have all the tools out and going, and when my brain gets going, witch is rare it is hard to stop. Thanks to Boss for the measurements and some of the steel
Have A Nice Day!
-
- 10+ Years
- Posts: 3560
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: Built 3 of these this weekend
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Built 3 of these this weekend
Clint, if you didn't taper the bottom of the point, I would do that. Don't ask how I know! Also some shims on the sides like the original Cole planter to lessen "slop". Looks like a very good job and should work well.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- 10+ Years
- Posts: 505
- Joined: Thu Jan 06, 2011 5:46 pm
- Zip Code: 27265
- Tractors Owned: Ford 2000
78 Cub Fast Hitch Red
78 Cub Red
76 Cub Red
75 Cub (Not Long Stripe) Yellow
70 Cub Yellow Fast Hitch
53 Cub 151 Disk Plow
69 Cub - Circle of Safety: Y
- Location: NC
Re: Built 3 of these this weekend
what do you mean taper the bottom of the point? How will that help? Thank you.
Have A Nice Day!
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Built 3 of these this weekend
Start at the bottom front of the and remove 1/8" to3/32" over about 4
" . The drawbar has several bends in it. Check a factory point, they are not flat on the bottom either.
" . The drawbar has several bends in it. Check a factory point, they are not flat on the bottom either.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12
- 404
-
by DBIZZELL
Fri Sep 24, 2021 10:33 pm
-
-
What year were farmall cub demonstrates built Attachment(s)
by JimCub48 » Fri Jan 21, 2022 10:45 am » in Farmall Cub - 12
- 618
-
by tst
Wed Jan 26, 2022 11:40 pm
-
-
- 4
- 202
-
by tst
Tue Apr 16, 2024 9:49 am
-
- 8
- 519
-
by tldec50
Thu May 13, 2021 5:34 pm
-
-
weekend auction goodies and re introduction Attachment(s)
by Olred » Wed May 12, 2021 3:05 pm » in Farmall Cub - 5
- 335
-
by CapeCodCubs
Thu May 13, 2021 9:22 pm
-
Who is online
Users browsing this forum: Don McCombs, Majestic-12 [Bot] and 12 guests