New doglegs!! Wow, they are tough to find for a square nose.
I have 2 hoods that can be used for making a template, but I never was good at art. I will try to remember my crayons, and will get it done in the next couple of days. In the meantime the below picture may help.... Also, the stickers are available from a dealer or TM. There are some ugly aftermarket ones around, so be careful. Also he has nice fasteners for the hood if you are going to order from them.
BTW, one hole is only for the headlight wires, so not as critical. There should be a nut welded to the dog leg for the headlight bracket (5/8 NC??). And the there are 1" standoffs on the radiator sides (those actually support the hood). The doglegs really don't add structural strength to the whole thing. Three pieces of sheet metal attach to the front of the hood, dogleg (light stud), radiator standoff and grille frame (also a weldnut). So it could be worthwhile to put it all in place BEFORE you do any drilling to double check the fit and alignment. There are also two holes on top of the hood....also for the grille frame. Oh, and two little holes for the hood ornament too.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)