Page 1 of 1
23-A question
Posted: Tue Jan 15, 2013 11:28 am
by grasser
I have a question about my 23-A. When I throw the gangs at an angle, the center hubs between the right and left gangs rub together while disking.
Is this how it was designed?
Re: 23-A question
Posted: Tue Jan 15, 2013 12:30 pm
by ScottyD'sdad
Mine does that, too. Probably designed that way, or we own a pair of defective ones. Ed
Re: 23-A question
Posted: Tue Jan 15, 2013 2:27 pm
by lazyuniondriver
When I was a kid, I'd sit for hours on the fender of the Cockshutt watching the disk hubs rub together for miles and miles. Couldn't tell you who manufactured the set but always figured it was caused by years of dirt and dust wearing on parts with no lubrication.
Re: 23-A question
Posted: Tue Jan 15, 2013 3:32 pm
by Boss Hog
They should not hit
Re: 23-A question
Posted: Tue Jan 15, 2013 7:56 pm
by BIGHOSS
Re: 23-A question
Posted: Tue Jan 15, 2013 9:33 pm
by Boss Hog
They did not hit on some of the better ones I have had and hit on the ones that were not as tight