Wed Jan 16, 2013 9:47 am
I will try to make along story short. Split tractor for trowout bearing change & rear seal fix. Back together no problem. Manifold had pipe welded in, so I changed it. I used the old gasket. Engine had a miss on #3. Pulled manifold swaped gasket front to rear now the miss is#2. Engine ran good before work, no stuck valves, good compression. Have gasket ordered.
Wed Jan 16, 2013 10:07 am
Short answer, Yes. Wait until new gasket installed. If skip persists try unlit propane torch around gasket area. If gasket leaking, the skip/miss will cease when the unlit propane is drawn into the engine at leak site.
Wed Jan 16, 2013 12:25 pm
Gasket. Fixed. It learn. Something. Every. Day
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.