Page 1 of 1

174 runner planter help

Posted: Sun Jan 20, 2013 3:53 pm
by Bamacub
I have a 174 runner planter that is missing the pressure rod(#5 on page 38 in the 174 planter manual). Anyone that could give me a measurment & maybe the spring tension or better yet anyone have one for sell. Thanks for any help. I cannot copy & paste the picture.

Re: 174 runner planter help

Posted: Sun Jan 20, 2013 11:39 pm
by AL Farmall Boy
Check with Mr. Hog. Boss Hog. I actually have a couple of nice ones, but since I actually need to put them on a couple of planters myself. A shame since we're so close (Bessemer, AL). Good luck finding one, and if you don't let me know and I'll see if'n I can locate you one or get you the deminisions. You could ride over sometime and we could get you the measurments & talk Cubs for the rest of the day.

Re: 174 runner planter help

Posted: Sun Jan 20, 2013 11:47 pm
by RaymondDurban
Here is the image:
Image

Re: 174 runner planter help

Posted: Mon Jan 21, 2013 12:05 am
by Boss Hog
I have one and the hard to find pin
Boss

Re: 174 runner planter help

Posted: Mon Jan 21, 2013 8:04 am
by Bamacub
Would you part with those Boss?

Re: 174 runner planter help

Posted: Mon Jan 21, 2013 8:08 am
by Boss Hog
I am only married to my wife :D

Re: 174 runner planter help

Posted: Mon Jan 21, 2013 9:17 am
by Bill E Bob
Boss,
If you run across another one I'd be interested.

Re: 174 runner planter help

Posted: Mon Jan 21, 2013 10:15 am
by Bamacub
PM sent thanks Boss