This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
relief valve trick needed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
relief valve trick needed
good morning all, from the deep south. just curious to see if anyone has a way to get the oil pressure relief valve nut off without removing lower inlet tube/hose . coppersmythe.................................
-
- 10+ Years
- Posts: 1124
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
Re: relief valve trick needed
Can you remove the bolt (in front of the pressure relief nut)? This bolt is one that attaches the front of the engine to the bolster. With this bolt removed, you should be able to get a socket on the pressure relief valves nut. You might have to use an extension on the socket to reach it.
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: relief valve trick needed
That's how I did it recently on my post '55. Once that lower right bolt was removed you have good access to it with an extension. Good luck.
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: relief valve trick needed
thanks , i'll give her a go, the gasket between the lower tube and crankcase looks like a can o worms . coppersmythe...................................
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: relief valve trick needed
well , the pressure relief valve was stuck . thanks for the tip , the bolt came off easy . coppersmythe............................
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 232
-
by phill_mi
Wed Oct 04, 2023 8:24 pm
-
- 4
- 228
-
by 5 Forward
Thu Sep 22, 2022 4:41 pm
-
-
Winter cold starting trick - plowing snow Attachment(s)
by cdahl383 » Thu Jan 18, 2024 3:49 pm » in Farmall Cub - 47
- 1353
-
by Jim Becker
Thu Jan 25, 2024 12:12 pm
-
-
- 2
- 172
-
by NJ Farmer
Mon May 09, 2022 8:58 am
-
- 7
- 422
-
by MontanaMan
Tue Feb 21, 2023 7:14 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 5 guests