Moderator: Team Cub
Remove the wire from the center of the distributor cap and place about 1/4" from engine block. Rotate engine one full turn. You should hear the magneto snap and see a spark. No snap and or no spark - magneto problem.69DAM wrote:but i'm not getting any fire.
69DAM wrote:I have rotated the rotor around to get as close as possible, but i'm not getting any fire.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
69DAM wrote:All i have to say is WOW!! You guys are awesome. thanks so much for the assistance. I'm going to print all of this out and put it to action this weekend. I look forward to updating my results after i do it. thanks again guys!!
Barnyard wrote:... My wife and I are driving 12 hours to attend. ...
Users browsing this forum: BigBill, Bob McCarty, Dale Finch, Garvin Gatewood and 7 guests