Moderator: Team Cub
Gumby wrote:I bought brand new bulbs.
Could be and probably is a low fuel supply issue. Remove the plug from the side of the carburetor and with a container catch the draining gasoline. Watch the fuel flow for 60 seconds. There will be a sudden gush of gasoline, your want to see a decent stream of gasoline draining out for the full 60 seconds.Gumby wrote:It runs for a few minutes and cuts off. I can restart it immediately.
Gumby wrote:What coil is recommended for a 12 volt system?
Eugene wrote:Coil. If you use a 6 volt coil or a 12 volt coil with out internal resistor - you need the Chrysler ballast resistor. Cheap at auto parts store. Usually under $5-. If your used coil contains the internal resistor, then you do not need the Chrysler ballast resistor.
Users browsing this forum: pickerandsinger, skwimjim, workacub and 10 guests