Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Wed Feb 06, 2013 8:26 pm
In the past I purchased a Cub power unit ser.#64HTC252 9 and used the motor for my Cub. I want to get rid of the remaining parts, the tank, radiator, stand and the reduction part. The reduction appears to be 2.3 to 1. Does anyone have more info on this unit and the possible value. I don't know what it came off of.
Wed Feb 06, 2013 8:49 pm
if it was complete it may have been worth $150 or so now just parts
Wed Feb 06, 2013 9:08 pm
It probably came from a hay baler, if it has a right angle shaft and pulley assembly. I have a couple of them, one on a buzz saw, and one on a corn grinder. Ed
Wed Feb 06, 2013 9:50 pm
G'day to you and glad you have joined the family
Check the PM that I sent you. I also have a Power Unit - mostly the same parts as you have. Price depends on the condition of the parts and if there are any cracks at all, any pin holes, leaks etc.,. Without pics it is hard to determine the value. Boss is probably in the right ballpark.
Thu Feb 07, 2013 8:56 am
Boy, I have a complete running power unit and I certainly would never let the whole thing go for 150. I thought they went for an average of 350-500???? The engine alone should've been worth 300-500. Has the economy gone downhill that much??? Buying cub parts on the for sale section and ebay don't reflect a poor economy that much
stuff is still selling at premium prices.
Thu Feb 07, 2013 9:03 am
PAsam wrote:In the past I purchased a Cub power unit ser.#64HTC252 9 and used the motor for my Cub. I want to get rid of the remaining parts, the tank, radiator, stand and the reduction part. The reduction appears to be 2.3 to 1. Does anyone have more info on this unit and the possible value. I don't know what it came off of.
The 64HTC in the serial number says it came from a model 64 combine. Gear reduction should take it down around 540 RPM.
Thu Feb 07, 2013 10:11 am
Complete and running , 2 different things
Thu Feb 07, 2013 10:45 am
I just assumed that since Sam used the engine for his cub, it was a good running engine and the power unit was complete before he took it apart. Guess we need more facts on if it was complete and running. I always get into trouble when I assume
Thu Feb 07, 2013 11:16 am
The power unit had a running engine which I removed and put on the Cub. There is no engine on the unit at this time. The reduction shaft is straight out the back with a large and small V pulleys in it. The bell housing still has the throw-out bearing arrangement with lever control, but I'll need to check on finding where I put the clutch. Thanks on the info that it probably came from a combine.
Thu Feb 07, 2013 12:37 pm
Biggest problem is (based on my power unit) radiator is different (won't fit standard cub), tank is seperate unit, etc., so unless you need the parts to build a power unit they aren't usable! ???? Dusty B
Thu Feb 07, 2013 8:12 pm
You are absolutely correct! The tank and radiator and some of the small parts along with the reduction are only pieces that will work on a power unit. It is prudent that I hang on to my old motor and the pieces that will fit my Cub.
Fri Feb 08, 2013 7:12 am
The power unit may have used some stuff off a farmall A. You might want to check into that. I got a radiator shourd off one that I thought would fit a cub and it was too big.
Fri Feb 08, 2013 7:21 am
Running power unit, I agree with Rick 300 to 500. Other than the motor not much will work on a cub.
Fri Feb 08, 2013 8:21 am
Kirk-NJ wrote:The power unit may have used some stuff off a farmall A. You might want to check into that. I got a radiator shourd off one that I thought would fit a cub and it was too big.
Very little will work there either. The radiator for example has the lower outlet on the wrong side.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.