Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Tue Feb 12, 2013 12:41 pm
I have received a new seal for the retainer for the transmission input shaft bearing. As some have noted, the seal is a bit loose. I can fix that with sealer, punch and washers. However, my primary concerns are that the seal sure has less metal than the original, looks cheaper and is 1/4 inch instead of 3/8 inch.
The photo of TM Tractors item 528810R91 which contains retainer and seal also appears to reflect a seal with less metal than the original and a less thick seal. The seal does not appear to fit flush in the retainer as the old 3/8 seal does.
Am I seeing reality of today's "cheap stuff" or am I missing something? Bottom line, should my new seal be okay as long as I install properly in the retainer?
Tue Feb 12, 2013 2:05 pm
should be fine , I have had no problems as long as you do as I said in the other thread
OH and yes things are made cheaper now by far
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.