Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Wed Feb 13, 2013 8:32 pm
Working on the project 58 cub again...getting her ready for the first coat of primer..while wire wheeling the steering support. Got down close to bare metal when I noticed YOUNGSTOWN YC cast into the support.
Just thought this was interesting...never noticed that anywhere else before..Tom
Wed Feb 13, 2013 9:10 pm
That can't be rite..is it???
there is also a small badly corroded aluminum plaque riveted to the floor board...
Wed Feb 13, 2013 9:17 pm
Do you know the history of this Cub? i.e. where it came from or previous owners?
Wed Feb 13, 2013 9:21 pm
cubguy47 wrote:Do you know the history of this Cub? i.e. where it came from or previous owners?
I got the cub in Bowie, Maryland..He talked of it being part of the Family...really didn't ask for how long...wish I did now...
Wed Feb 13, 2013 9:38 pm
Can't help but wonder if the steering support has a manufacturer's mark in it. They just happened to get the end of the pipe that had the manufacturer's mark on it when they made your steering support.
The ID tag is very interesting.
Wed Feb 13, 2013 10:05 pm
That's really cool. Thats the thing with these machines, You never know how many hands have been on them. It's nice to see another MD member. There were a lot of cubs in this area to tend to the Tobacco. Mine has lived its life in pretty small area (Davidsonville) its whole life.
Wed Feb 13, 2013 10:47 pm
I have seen that on the steering post before
Wed Feb 13, 2013 11:44 pm
I have seen the steering post with youngstown on it a lot over the years. The pipe for the post was made at Youngstown sheet & tube back in the day. Youngstown ohio. The tag was probabley installed by the original owner. Probabley a business of some kind.
Thu Feb 14, 2013 12:24 am
I have at least one tractor with the same showing.
Thu Feb 14, 2013 1:23 am
Jim Becker wrote:I have at least one tractor with the same showing.
As do I.
Thu Feb 14, 2013 7:23 am
Thanks Guys for all the responses...So it is a common casting...and NOT Youngstown Yacht Club...Whewwww..
Thu Feb 14, 2013 8:17 am
All of my sister's in-laws worked at Youngstown Sheet & Tube back in the day. Her husband worked there on summer breaks in college and her father in law worked there 30 or 40 years. I can remember going to Youngstown in the '70s for visits. It is a completely different town now. They still have Elmton Pizza, Handel's Ice Cream & Carchedi's
Kind of neat to have a round about family tie to making Cubs.
Thu Feb 14, 2013 8:23 am
I have a cub with a tag on it also. Mine is a asset tag from Hormel.
Thu Feb 14, 2013 8:58 am
I have two with that on.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.