Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
15 posts • Page 1 of 1
Hello Cub board!
Long time away, took lotsa pills, hope they work.
I am in need of knowledge about carb cleaner preferences...
I have a very cruddy carb that needs my attention and have had no luck doing a search on the board for existing threads.
One of the few advantages of growing older is that I finally realized that I haven't made ALL the stupid mistakes! Yet!
soda blast it . Then use any name brand carb cleaner
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
I've purchased a gallon can of chemical dip a number of years ago. Dipped and cleaned quite a number of disassembled carburetors. Kinda nasty stuff but does remove crud and paint and is fairly expensive for only one carburetor.
Couple spray cans of carburetor cleaner. Works great and you can use the plastic tubing to blow/clean out carburetor passages. If you are only going to work on one carburetor - 2 or 3 spray cans of carburetor cleaner will be much cheaper.
I have an excuse. CRS.
Picked up a gallon of this at O'Reilly Auto Parts some time back. Stuff lasts a long, long time and does a great job.
My 1945 Farmall H makeover
Also available at Wal-Mart.
MD, Deep Creek Lake
"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Agree with boss.....soda blast...
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Umm, Boss. Just what is a soda blast? Some baking soda with water in the carb parts in a bucket? Let me know, please?
Its like a sand blaster, only it uses baking soda, that dissolves in water, so it can't plug passages. You can soda blast, with the hand held blasters, with baking soda, for a small job, like a carb. Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
It's a gun, similar to a high volume low pressure (HVLP) spray gun; hopper on top, gravity fed. Here's a pic:
Some forum threads:
Do a search for soda blasting...if you do it, let us know how it turns out.
My 1945 Farmall H makeover
This is what a soda blasted carb looks like. This is the original 1950 carb. I used a cheapo blaster as shown in the previous post, and a box of arm and hammer baking soda. Wear eye protection and a dust mask. Then wash the carb thoroughly in hot soapy water, and install a complete rebuild kit.
I'll be drinking that free bubble up, and eatin that rainbow stew.
Last gallon of that i bought, about 6 or more years ago was $45 as I recall.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
That's about what I recall NAPA's price was for what they market, but the Berryman's was about $20 at Autozone.
'60 FH Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
I have both the NAPA brand carb cleaner --- yuuuuuk . This has got to be the most vile compound I have ever come across and I have smelled a lot of cruddy VOC's in my lifetime. I won't use it and I consider it a colossal waste of badly needed cash for my Cub Fund. I truly regret purchasing it. Now that I have COPD/PF this gallon will either got directly to my local HazMat Recycle facility or to someone who really likes/wants/needs it.
My preference is definitely Berryman's. I first learned about it when Don introduced it to me back in '06 at Cecil's. It took me almost 3 years to get some but I finally managed to smuggle some into Canada Berryman's is a very low odour VOC and one that I can say is one of the safest to use.
I also have one of those guns used for soda blasting. I am going to try that on some of my older carbs this spring when it warms up enough to play with them. They are already pretty clean from dipping in Berryman's but I really would like to see them a little brighter. Wire wheel only gets into so many places unless you have the Dremel and it's multitude of min wire brushes.
Cheep and does one heck of a job, just build your own out of what you have on hand.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
15 posts • Page 1 of 1
Who is online