Have heard of people making them for cubs but have never seen one, was wondering if anyone on here had a picture of one and what you used to make it as far as the generator part etc. Was thinking about building one if I could get a little input on here
Thanks.
Drawbar mount pto driven generator
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
3 posts
• Page 1 of 1
Drawbar mount pto driven generator
by DD92cubs » Thu Feb 14, 2013 11:32 pm
-
DD92cubs - Posts: 23
- Joined: Wed Aug 08, 2012 12:40 pm
- Location: Paxton, IL
- Zip Code: 60957
- Tractors Owned: 49 farmall cub #99532
72 cub cadet 128 (gtp)
74 cub cadet 129
76 cub cadet 1650
Re: Drawbar mount pto driven generator
by Barnyard » Thu Feb 14, 2013 11:39 pm
Here is a topic that discussed this some time ago. viewtopic.php?f=1&t=47468&hilit=generator+drawbar
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -
- Franklin D. Roosevelt -
Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
-
Barnyard - Team Cub
- Posts: 17862
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 
- Circle of Safety: Y
Re: Drawbar mount pto driven generator
by Dan Robertson » Fri Feb 15, 2013 9:18 am
I built this one a few years ago. It is a 5000 w Simplicity. Plugs right into the fast hitch. I have since the photo added a V pulley on the right angle drive. Engine RPM is 1600 +/- to get 60 cycle voltage. You can click on this lick to see more related pics. http://photos.cubfest.com/index.php?cat=10018
Dan Robertson
We all make mistakes
I try to keep mine to a minimum
-
Dan Robertson - 10+ Years
- Posts: 311
- Joined: Thu Feb 06, 2003 4:08 pm
- Location: Bedford, IN
- Zip Code: 47421
- eBay ID: gotowin
- Tractors Owned: 55 cub,
74 cub,
Cub Cadet 1515,
Case 580B TLB,
53 Ford Jubilee,
MF 271XE,
JD 3130,
JD gater
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: ad356, Dale Finch, Glen, RUSSALL, sford, Spuds Buddy and 6 guests
|
|