Page 1 of 2

Help with a Brookfield Buzz Saw

Posted: Fri Feb 22, 2013 12:41 am
by Clint Carter
saw frame.jpg
This is what I am going to have to build
Looking at having to build the saw table or frame assembly for the saw and was hoping that someone that has one may could send me the sizes of the steel and some measurements. Thank you for the help.

Re: Help with a Brookfield Buzz Saw

Posted: Fri Feb 22, 2013 6:24 am
by bzsz1942
There is one for sale on Ebay. Contact the seller and he might give you the measurements you need.

Re: Help with a Brookfield Buzz Saw

Posted: Fri Feb 22, 2013 11:33 am
by farmallcub49
Clint I have one and can get them for you, but don't expect me to get them today, possibly tomorrow or next week. If someone beats me to it, so be it, but I'll try to help you out.

Andy

Re: Help with a Brookfield Buzz Saw

Posted: Sat Feb 23, 2013 10:47 am
by Clint Carter
Andy that would be awesome. i would be grateful for that.
Thank you much
Clint

Re: Help with a Brookfield Buzz Saw

Posted: Thu Feb 28, 2013 9:31 pm
by farmallcub49
Clint,

Here is what I was able to come up with. If you have any questions please ask. Don't mind the handwriting, it has always been that bad and the people who read my notes are thankful I use a computer instead of a pen. I put the angles of the two points were the table is welded together. I used my protractor, I was surprised I even had one, but it does have the word tractor in it, but I am no pro in using it.

I don't have the two braces, so I was hoping Barnyard or someone else with one could measure them up and post the actual dimensions for us.

Image

Re: Help with a Brookfield Buzz Saw

Posted: Thu Feb 28, 2013 9:33 pm
by farmallcub49
Well, that looks like you know what. I guess you can pm me your email and I can send it to you full size. Rudi was sent a copy via email, so hopefully he sees this and can make it better with his copy.

Re: Help with a Brookfield Buzz Saw

Posted: Thu Feb 28, 2013 10:20 pm
by Rudi
Let's see : Brookfield Saw Table Dimensions. Yup, right click and save as a .pdf.

Image

Re: Help with a Brookfield Buzz Saw

Posted: Fri Mar 01, 2013 1:28 am
by Clint Carter
Andy
Thank you so much, this will be a huge help. I think i might need 3 or 4 more but that should be it. i know with the angle of the drawing it makes it hard so i found a different one and put the lines were i need to try to make it easier.

Re: Help with a Brookfield Buzz Saw

Posted: Fri Mar 01, 2013 11:55 am
by farmallcub49
Clint will do when I get a chance, I am at work and shouldn't be even on here!

Re: Help with a Brookfield Buzz Saw

Posted: Fri Mar 01, 2013 4:02 pm
by farmallcub49
The gap on the table is 5 7/8"

The upright measures 13" and 7 1/2"

The downward angle measures 17 1/2" and 8 5/8"

Maybe if you draw it out on your sketch above, I can re verify that all is correct. Wish I was educated enough to know how to make such a nice looking drawing as you have.

Re: Help with a Brookfield Buzz Saw

Posted: Fri Mar 01, 2013 10:37 pm
by Clint Carter
Ok let me know if i have this right Andy.

Re: Help with a Brookfield Buzz Saw

Posted: Sat Mar 02, 2013 8:54 am
by farmallcub49
My bad the 17 should be 17 5/8" and the 8 5/8" should be 8", i need to learn to write better. The 12 1/2" dimension is correct. Maybe you want to do this for all the measurements, but I double checked them twice, so all shall be well. Happy welding.

Re: Help with a Brookfield Buzz Saw

Posted: Sat Mar 02, 2013 9:23 am
by Rudi
Clint:

farmallcub49 wrote:Maybe you want to do this for all the measurements, but I double checked them twice, so all shall be well.


That would be ideal, I am sure many would agree. I am sure there are a few others out there that need to replicate a few parts.

Re: Help with a Brookfield Buzz Saw

Posted: Sat Mar 02, 2013 10:09 am
by Rick Prentice
Clint, If that table was made by me today, I'd be changing a couple features to make it a lot safer and user friendly. The first thing I noticed when I used mine was the top handle they created. It's located left of the blade. When cutting a branch or log and you have the log positioned to cut, You have to hold the log tight into the table(with left hand) so it doesn't spin, making your arm right next to the spinning blade as your pushing the table forwards. If the log is longer than a couple feet, it quickly falls off the table to the right side. A guy only has 2 hands :shock: and sometimes you use this thing in your backyard and a bunch of Cubfest guys/gals aren't around to help you.

The table needs to have the handle made on the right side of the table and the left side of the table also needs to be extended a good 6-8 inches to support the cut piece until you're ready to remove it. I noticed on mine that every time you make a cut, the piece falls to the ground and sometimes falls right back into the blade area. After several pieces fall, you have to remove them and then you're grabbing wood right next to the spinning blade. It takes way too much time shutting off the blade to keep the area clear.

That's just some quick changes I'd make. Anyone I've ever seen running that saw quickly switches positions. You start off running the saw grabbing their handle and then after you realize how stupid that is, you switch to pushing the table from the right side, not ever touching their handle again.

I know this is just a small saw and not meant to cut long, big mill size pieces, but just a small improovment would make the Brookfield 10 times safer.

My .02,
Rick

edit: If I were to buy a reproduction table made by someone, I'd much rather buy one revised than an original looking original that doesn't function properly. Anyone that's operated one should agree, maybe.

Re: Help with a Brookfield Buzz Saw

Posted: Sat Mar 02, 2013 12:02 pm
by Clint Carter
Those are some very good points Rick. I have never used one or even seen one used in person but have on the computer and your right it seams it takes two to run it so i will get my thinker going and see what i can come up with and let you know to see if you think it will work.

Andy & Rudi i am working on the drawing with the measurements, it will take a little time but i will get it done working on it now.