Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Sat Mar 02, 2013 2:46 pm
Ok i have the drawings done, took bout half a day but hope it will make it easy for the next person. Would like for Andy to go over the measurements one more time to make sure all is right. Pics used are from TM
- saw table 1.jpg (148.23 KiB) Viewed 102 times
- saw table 2.jpg (134.18 KiB) Viewed 118 times
Last edited by Clint Carter
on Sat Mar 02, 2013 5:41 pm, edited 1 time in total.
Sat Mar 02, 2013 4:40 pm
That looks super. The only thing I see missing is the 12 1/2" bed depth dimension. Rick brings up some great points and I'll have to give adding a different handle and a bed extension some thought. The nice part is, when we use saws like this, we always do it at the neighbors. He has an old ear corn elevator that the cutoff drops into and then it is elevated into his dump truck. Once full we dump it near the wood chute and spend a couple days watching and coaching the kids on how to get it in the house and stacked up for winter.
Sat Mar 02, 2013 5:44 pm
thanks for pointing that out Andy. All is fixed.
Sat Mar 23, 2013 8:46 pm
Here are the dimensions for the fender supports.
Sat Mar 23, 2013 9:41 pm
Thanks for the sizes bill
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.