Farmall Cub Forum
Sun Feb 24, 2013 6:12 pm
I'm not doing a restoration, but I'm replacing the lower radiator housing and trying to get the electrical system to work. As I do this, I'm cleaning things up and fixing minor things since I've got it opened up. Are there any documents or pictures showing which are the correct parts for different model years? I don't want to create an anachronysm.
Sun Feb 24, 2013 6:23 pm
Jude the the parts are all interchangable for the most part. In later years there may be a few differences. All cast parts have a cast code for the date they were made, but unless you want to be year specific you will have no problem. If you do want to use the correct year then you need a cast date code ending in S for a 1949.
Mon Feb 25, 2013 12:30 am
G'day to you.
The answer to your question is yes - Cub Parts Manuals
. Enjoy going through them. You will see that Bill's comment is bang on.
Suggest you follow the links below and get to know your '49 Cub before you get into it too far.
Mon Feb 25, 2013 2:04 pm
It depends on just how detailed you want to get in maintaining the original configuration. To get into details, you will need to use the Parts Catalog from close to when your tractor was built. Depending on when in '49 your tractor was built, the 5/49 catalog Rudi pointed you to is right. A later catalog (also available there) will be needed for a late '49. You can check for a part number in that catalog then check a late catalog to see if the part changed.
Part number suffix changes are usually pretty minor and you may not see any difference. These number changes will be something like going from 12345R1 to 12345R2. Major part changes will have a change to the base number and may be more obvious. Larger castings have date codes but most smaller castings will not.
The more significant part changes will have a serial number effectivity listed in the catalog.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.