Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
6 posts • Page 1 of 1
I never was aware of a procedure called helicoiling. I never came across it until I became a 1st time Cub owner and joined the forum. Explanations /videos / pics very much appreciated. Needless to say I am a greenhorn mechanic I am of the opinion,from what I have read, that it is some type of method to repair threads in a bolt hole. Looking forward to replies from the experts,
Many Thanks, to all the guys who have advised me on oil changing and cleaning & setting points.
Rudi has made a documentation that is a very good instruction page. The Helicoil is the name of the kit to repair threads. There are other thread repair methods as well but Helicoil seems to be pretty good way to do it.
Check out this link.
Guiena, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub.
It really is a lot cheaper than replacing a perfectly good final or any other part. Works on carbs, blocks and just about any thread that has been ruined. Once attempted and the 1st one is successful, it becomes familiar like an old friend as you keep doing them. Rots of fun
One common place to need to Helicoil is the 5/8 implement bolt holes in the finals. The two main causes of these are loose bolts or improper bolts. The helicoil is a coil spring such that the inside hole matches a 5/8 bolt thread. The external thread is some non standard larger size. The drill bit required is 21/32 inch which is not a comon size but they are available. After carefully drilling out the defective bolt hole, ( I say carefully drilling it out for we don't want to drill all the way through the final for fear of an oil leak.) we will tap the hole (cut threads) with the special tap included in the helicoil kit. The next problem is that with a blind hole (one where the threads do not go all the way through) one must use a second bottom tap to get threads to the bottom of the hole. I found it necessary to buy a second kit and grind the end back of the included tap in order to remove the starting threads, that I may tap to the bottom of the hole.
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
6 posts • Page 1 of 1
Who is online