Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Mar 15, 2013 7:10 am
Clean up all of the electrical connections; battery cable ends, battery terminals, wire terminals, etc.. Corrosion = voltage drop.
Fri Mar 15, 2013 8:10 am
Thanks to all for your input. I will try a known good amp guage first, and go from there. I did order a VR just in case. I don't mind having an extra.
Fri Mar 15, 2013 11:46 am
Even if the current voltage regulator turns out to be bad, I still recommend that you check the gaps on the regulator and cutout coils inside. If they are out of adjustment, you will still have your spare.
Sun Mar 17, 2013 8:06 am
I took the amp guage apart and it was pretty fried. It could have something to do with someone leaving the ingnition on for 6 months. (not me). The needle couldn't move because of that brown piece on the needle cracked and swollen.
It still wasn't charging though, so I'll replace the VR and the guage.
- 006 (640x427).jpg (89.83 KiB) Viewed 101 times
- 005 (640x427).jpg (87.76 KiB) Viewed 101 times
Fri Mar 29, 2013 1:19 pm
Problem solved! New VR and guage and it charges like it should. I did have to add an external ground to the VR, but I did that on the last one too. It's time to go for a little ride.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.