TC block rebuild

Tue Mar 19, 2013 7:18 pm

I started rebuilding the touch control block(early style) on my dads cub. When I took back cover off things went sorts haywire and parts were falling out on to bench. Is there a diagram of in what order the parts go back in? He bought a parts manual a long time ago but it's not printed clearly enough for me to tell what order parts go into the block.

Re: TC block rebuild

Tue Mar 19, 2013 7:46 pm

Steve:

GSS-1024 Touch Control

Image

Image

Re: TC block rebuild

Tue Mar 19, 2013 7:54 pm

May be of some help you.

viewtopic.php?f=141&t=42857

Re: TC block rebuild

Wed Mar 20, 2013 8:02 am

I looked at the instructions in the how to section and these blocks are a bit different. I'll print off what Rudi put up. That should help a lot. Thanks.

Re: TC block rebuild

Thu Mar 21, 2013 1:58 pm

There are 2 different ones, and you need to order the kit by the number cast into the side. Or on some it us under the overhang on the front of the block.

Re: TC block rebuild

Sat Mar 23, 2013 10:16 pm

Thanks for the help. The rebuild went great after looking here for the answer. Put it back on the cub today and it works great and no more leaking..............yet!

Re: TC block rebuild

Sun Mar 24, 2013 2:45 pm

Steve:

Congrats :applause: on the successful rebuild. Glad we were able to be of some help. Keep us posted :)