Belt pulley housing. Is that the screw behind the fan? It says 1/3 Pt of gear oil. Where do I drain it? When I drained the Steering gear box a quart came out. But the book says 3/4 Pt. Which one is it? 1951 Farmall cub
torchred89 wrote:So number 3 I just put a couple of drops of oil.
Check para 9 below - follow those instructions:
torchred89 wrote:The other one I don't have.
Yup, if you don't have it, you don't need to lubricate it
torchred89 wrote:I guess I better drain half of the gear oil out of the steering box.
How much did you put in there - the whole quart? If so, then probably.
This is a prime example of why I am always repeating the same mantra over and over again ... RTM Read The Manual before anyone starts mucking about with their Cub. It was one of the first things my mentors taught me way back when, George Willer, Albie, Big Dog, Jim Becker and John Puckett. Their advice back then applies equally as well today.
So, suggest you have a park with a cup of coffee, a comfy chair and the Owner's Manual. Read it thoroughly then when absorbed go out to your Cub and apply that newly gained knowledge. Print of the Lub guides, maintenance schedules and then start with item # 1 on your list, go from there.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
I did the rear axel,Trans.,steering box.greased all fittings. Put new Radiator and anti freeze. New plugs points & voltage regulator and belts. Tommorow I'm going to drop oil pan and clean screen. Front wheel bearing cleaned and packed. Is all I'm waiting on is the wireing harness. What else should I do?