Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Mar 22, 2013 4:58 pm
at my local farm auction, there is a woods l59 belly mower there, im really interested, its in good shape, looks to be complete, it comes with a pto pulley, which is larger in diamater than a normal cub pto pulley, but comes with an adapter that would allow it to fit on the cub's pto shaft, is there any reason i cant use the larger pulley? does anyone have a ball park estimate of what it might sell for? thanks!
Fri Mar 22, 2013 5:27 pm
A ballpark estimate at an auction is hard to say. A year ago I sold a Woods 72 and a Woods 59 both in excellent shape with all hardware, guards and pullys at a large farm auction. The 72 brought $125.00 and the 59 brought $60.00. Ouch and Ouch! It all depends how bad someone wants it, and how many bidders.
Fri Mar 22, 2013 7:30 pm
from googleing it, the woods L59 will not work on a Cub? am i wrong on this?
Fri Mar 22, 2013 9:01 pm
Dont know if you are right or wrong,---BUT KEEP IN MIND 9 HP to drive it and the bigger the pulley the more hp needed just to get the mower up to speed!----I had one on a 53 cub one time and it wouldnt even get the blades going very well and when it did the whole mower shook and sounded like jet engine starting up!---I put a 4 inch drive pulley on it and could then get the blades to go but not cut much! I went to the single blade 42 and it worked a little better! --if you have 6 speed then you will be ok, but not with the common 3 speed cub. thanks; sonny
Fri Mar 22, 2013 9:32 pm
1farmall95cub0 wrote:from googleing it, the woods L59 will not work on a Cub? am i wrong on this?
L59 is for left and everything on it is backwards to the normal 59. I think to make it work you can put a 180 degree twist in the belt. Then you have to get the right size pulley, depending on how big "big" is it could be off a 100 or 140 size tractor or even up to an H or M for the really big pullies. Then you have to get the right brackets.
My opinion is could it be made to work? Yes. I seem to remember several threads about doing so.
Is it worth the trouble and expense? Not to me. I'd rather get the right one, either a 59 (has it's usefulness and limitations) or in my opinion the better all around 42.
Fri Mar 22, 2013 9:33 pm
hard to beat a woods or IH 42 in mower on a cub
Fri Mar 22, 2013 9:39 pm
thanks guys! im glad i posted on here cause i was fully planning on having it in the back of my truck after the auction, but now i think the best thing for me to do is what you said, and stick it out and wait for a good used 42 59 to come around
Sat Mar 23, 2013 1:26 am
Yeah, that mower is for a larger tractor. Probably the mounts won't fit up either...
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.