Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Mon Mar 25, 2013 12:31 pm
Did anyone make a two gang fast hitch disc that was usable on the cub? I saw one today that was 16 blade, but there was a two bottom plow right beside it, so I assume it was used on a SA etc. I could find no markings/stickers etc on the disc, but it appeared to be 4 or 4.5 feet wide.
Mon Mar 25, 2013 1:10 pm
I don't think they did. I have a disk like that for my Super A and it is pretty heavy.
Mon Mar 25, 2013 5:09 pm
I have a friend who converted a Kubota double cut disk to fast hitch for his cub. He says it works good. About 4 foot wide, originallyfor a small Kubota.
Mon Mar 25, 2013 8:54 pm
I saw recently where a local guy bought a 4 foot 3 point disc from agri supply, and cut the hitch off and converted it to work on a non fast hitch cub. It was a pretty slick setup.
Thanks for the replies. I am with you Al....I think this disc was probably for a Super A. The only two gang lift type I have seen for the cub was a fordmac, and even though it says it will work with Super A or cub, I think it would be a bit much for the cub lift at 5 feet wide.
Mon Mar 25, 2013 9:58 pm
clodhopper wrote:......... The only two gang lift type I have seen for the cub was a fordmac, and even though it says it will work with Super A or cub, I think it would be a bit much for the cub lift at 5 feet wide.
working with a cub, and being lifted by a cub are not the same thing.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.