Page 1 of 1
Another Disc question
Posted: Mon Mar 25, 2013 12:31 pm
by clodhopper
Did anyone make a two gang fast hitch disc that was usable on the cub? I saw one today that was 16 blade, but there was a two bottom plow right beside it, so I assume it was used on a SA etc. I could find no markings/stickers etc on the disc, but it appeared to be 4 or 4.5 feet wide.
Re: Another Disc question
Posted: Mon Mar 25, 2013 1:10 pm
by Super A
I don't think they did. I have a disk like that for my Super A and it is pretty heavy.
Al
Re: Another Disc question
Posted: Mon Mar 25, 2013 5:09 pm
by danovercash
I have a friend who converted a Kubota double cut disk to fast hitch for his cub. He says it works good. About 4 foot wide, originallyfor a small Kubota.
Re: Another Disc question
Posted: Mon Mar 25, 2013 8:54 pm
by clodhopper
I saw recently where a local guy bought a 4 foot 3 point disc from agri supply, and cut the hitch off and converted it to work on a non fast hitch cub. It was a pretty slick setup.
Thanks for the replies. I am with you Al....I think this disc was probably for a Super A. The only two gang lift type I have seen for the cub was a fordmac, and even though it says it will work with Super A or cub, I think it would be a bit much for the cub lift at 5 feet wide.
Re: Another Disc question
Posted: Mon Mar 25, 2013 9:58 pm
by John *.?-!.* cub owner
clodhopper wrote:......... The only two gang lift type I have seen for the cub was a fordmac, and even though it says it will work with Super A or cub, I think it would be a bit much for the cub lift at 5 feet wide.
working with a cub, and being lifted by a cub are not the same thing.
