Hello everyone, I was wondering if someone could take a couple of measurments for me. My tractor is up north in my barn and I need to know what the distance from the ground to the top of the drawbar is? I would also like to know the distance between the end of the rockarm (when it's down) to the center of the drawbar. Thank you in advance, this will save me a two hour trip
Steve Schnipke
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
drawbar height
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 20
- Joined: Wed Feb 26, 2003 12:21 pm
- Location: Grand Rapids Michigan
drawbar height
Steve Schnipke
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Steve, I measured 12" from the shop floor to the top surface of the drawbar. It was also 20" from the center of the drawbar to the center of the end hole on the rockshaft arm.
The distance from the ground to the drawbar will vary depending on what tires you have.
The distance from the ground to the drawbar will vary depending on what tires you have.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 20
- Joined: Wed Feb 26, 2003 12:21 pm
- Location: Grand Rapids Michigan
Who is online
Users browsing this forum: No registered users and 30 guests