Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
I have a small BH disc, set of cultivators and moldboard plow, all of which are in good condition........ since they aren't doing any good just sitting around, I figured I would either fabricate a detachable hitch for them and try to put them to use or just sell them and invest the money in the cub. Anyone ever modify the small BH implements to use with a cub? Did they work well? They use the sleeve hitch type attachment like I had on an old simplicity yard tractor. Would I be better off just selling the lot of them and buying implements designed for the cub?
Yes, it will get something you can use, and preserve the implements for their correct use. They are really too light for a Cub's power.
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Know what you mean! I have a disc & blade , same way, just sitting unused! Dusty B
Grandpa's '41 B
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
I pull a small (weighted) disk harrow built for 2 wheeled garden tractors and a cut down peg toothed harrow behind a Cub Cadet.
Mounted, bolted, an unused Cub Cadet blade on the bucket of a Case 1816 skid steer. Works great for snow removal.
I have an excuse. CRS.
I'm sure it depends on location and condition but I just sold a Sears Suburban plow complete with coulter and weed rod, and a David Bradley cultivator with all 4 shanks and both depth wheels. Most of the paint was gone on both and they were lightly rusted all over. They sold in a few weeks for $125 each using a Craig's List ad. Spring is the time to sell things like that when people are thinking about their gardens. You live close to Roanoke, right, try listing them in their Craig's List and while your there look for folks selling Cub equipment. Make sure you post good pictures for best results.
Yea, I'd sell them. Brinly Hardy stuff is good equipment, and they bring nice prices with the garden tractor folks. I've never had a problem selling anything BH on Craigslist, and typically they sell for asking price. Unfortunatly, the BH stuff is really a bit too light for a Cub, and the biggest problem is wheel width. All the BH stuff is built for a garden tractor width, about 36-inches, and the cub is around 44-inches wide, so you will always be leaving tire tracks. I'd sell them and keep an eye out for standard Cub implements. They will work much better.
1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
I converted a brinley plow to the 3-pt hitch of my cub just to see if it would pull it!---(It wouldnt!!! not enough power!)---I also did up a 6" bottom from a David-Bradley and it only will pull that one about 4" deep,---I plow 16 to 18 " deep and gotta have serious power to do the job!---Thats why I use the big 1-bottom hi-clearance plow on the IH 706 and run 6 to 7 mph to really break up the ground in the fall!--I do NOT spring plow if I can avoid it! (makes for bad clods here in my ground!) thanks; sonny
Not if he sinks it 18" into the ground.
That would be like tying a poodle to a parked tractor trailer.
My F-Cub has no problem pulling a standard 12" 152 plow, it doesn't seem to have to work too hard at it at all. I believe a 706 would be able to handle a 3 or 4 bottom plow, no? I used to use a 3 bottom behind a 444.
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail
Not if you're plowing 16-18" deep, it won't...
He must have some real deep topsoil where he is. Around here you're well into the subsoil at 12" usually.
lol, here you are 12" into rock ledge at 18"
This is home of TN Crab Orchard Stone. Known worldwide for it's color and composition for buildings and signage
I picked up a B/H aereator at the transfer station, bent tongue and minus wheels. Was thinking about making new frame from scrap 4" angle I have with f/h point. Can purchase 5 additional "wheels" and spacers for about 60 dollars. Should work ok if picked up when turning. Finished tool would be about 60 inches wide. Sharp point type, not a plugger. What do you guys think?
"It is impossible for a man to learn what he thinks he already knows." -Epictetus
252646 & 221525. 195897 (Gone but not forgotten!)
Who is online